FTIINC.ORG/ MOVE
FUSION MOVE
Flat Decline Flat Conveyors
Flat Decline Conveyors
The Fusion Tech Flat Decline Flat Conveyor is designed to provide a flat to decline conveyance of your product — whether on its own or as part of a larger conveyor system. This conveyor comes with a variety of options, allowing you to “design your own” and get the conveyor that perfectly fits the needs of your spe- cific application. You can view the options available under the Design Your Conveyor section below. Constructed of high grade stainless steel, the Flat Decline Flat Conveyor is durable enough to withstand the most demanding environments and last you for years to come. ( ) OPTION C MOTOR AND GEARBOX NOT SHOWN - PLEASE CHOOSE CONFIGURATION FROM TABLE A ( ) OPTION D CENTER DRIVEN LEFT SIDE LEFT TO RIGHT CENTER DRIVEN RIGHT SIDE LEFT TO RIGHT PLEASE PLACE (X) NEXT TO DESIRED CONFIGURATION (TABLE A) ( ) OPTION A ( ) OPTION B RIGHT SIDE RIGHT TO LEFT LEFT SIDE RIGHT TO LEFT 6 5 4
The Fusion Tech Flat Decline Conveyor is designed to provide a flat to decline conveyance of your product — whether on its own or as part of a larger conveyor system. This conveyor comes with a variety of options, allowing you to “design your own” and get the conveyor that perfectly fits the needs of your spe- cific application. You can view the options available under the Design Your Conveyor section below. ( ) OPTION E ( ) OPTION A CENTER DRIVEN LEFT SIDE RIGHT TO LEFT LEFT SIDE LEFT TO RIGHT 6 5 4
7
2
1
3
8
FLAT - DECLINE CONVEYOR DESIGN GUIDE
PLEASE PLACE (X) NEXT TO DESIRED CONFIGURATION (TABLE A)
DESIGN GUIDELINES
7
8
RIGHT SIDE LEFT TO RIGHT
_______________IN. FLAT - DECLINE - FLAT CONVEYOR DESIGN GUIDE _______________IN. F
DIM "A" (IN-FEED TOB)
DIM "B" (DISCHARGE TOB)
F
DIM "C" (LENGTH) DIM "D" (WIDTH)
_______________IN.
( ) OPTION B
_______________IN.
F
DIM "E" (FLAT BELT LENGTH)
CENTER DRIVEN RIGHT SIDE RIGHT TO LEFT
_______________IN.
DIM "G" (SIDE HEIGHT)
_______________IN.
DIM "H" (FRAME HEIGHT)
_______________IN.
( ) FORMED SHEET METAL ( ) ANGLE IRON ( ) OTHER ________________________________________________________________________ ( ) CEILING ( ) FLOOR _____________________________________________________________________________________ IF FLOOR MOUNT - PLEASE CHOOSE ONE ( ) RIGID ( ) SWIVEL ( ) CASTER
FRAME
( ) OPTION F
E
E
MOTOR AND GEARBOX NOT SHOWN - PLEASE CHOOSE CONFIGURATION FROM TABLE A
MOUNTING
Constructed of high grade stainless steel, the Flat Decline Conveyor is durable enough to withstand the most demanding environments and last you for years to come.
E
DRIVE LOCATION
CHOOSE ORIENTATION IN TABLE A
BEARING HOUSING ( ) IPTCI ( ) EDT _____________________________________________________________________________________ BEARING INSERT ( ) IPTCI ( ) KILLIAN
BEARING SPECS
FINISH
( ) BEAD BLAST ( ) 2B ( ) DA
BELT LIFTERS
( ) YES ( ) NO
D
D
SPRAY BARS
( ) YES ( ) NO
"C"
( ) ADJUSTABLE DUAL DUROMETER ( ) FIXED 3MM THICK BELTING SCRAPER ( ) WEIGHTED BELT SCRAPPER ( ) ROTARY BELT SCRAPPER
BELT SCRAPER
"D"
"G"
D
"D"
BRAND _____________________________________________________________________________________ BELT STYLE _____________________________________________________________________________________ BELT SPEC _____________________________________________________________________________________ BELT MATERIAL _____________________________________________________________________________________ BELT COLOR _____________________________________________________________________________________ BELT BACK UP __________________________% BELT SPEED "E"
"C"
"G"
"D"
BELT INFORMATION
C
__________________________FPM BELT FLIGHTS ( ) YES ( ) NO DESIGN YOUR OWN Get the exact dimensions you need for your application: BELT FLIGHT HEIGHT _________________________IN. BELT FLIGHT SPACING ________________________IN. BELT TENSION ( ) NORMAL CATENARY SAG ( ) TAKE-UP "A"
DESIGN YOUR OWN Get the exact dimensions you need for your application: “A” — In-feed Dimension (top-of-belt):______ “B” — Discharge Dimension (top-of-belt):______ “C” — Length:______ “D” — Width:_____ “E” — Flat Belt Length:______ “G” — Side Height (above-belt):______ “H” — Frame Height:______ B "A" C
( ) WIEGHT TAKE-UP ( ) FLIP UP TAKE-UP ( ) NOSE BAR 3
7
6
5
8
"F"
4
7
2
1
6
5
8
GEARBOX SPECS “A” — In-feed Dimension (top-of-belt):______ “B” — Discharge Dimension (top-of-belt):______ “C” — Length:______ “D” — Width:_____ RIGHT SIDE LEFT TO RIGHT ( ) OPTION B DESIGN GUIDELINES DIM "A" (IN-FEED TOB) __ __ _IN. DIM "B" (DISCHARGE TOB) _______________IN. DIM "C" (LENGTH) DIM "D" (WIDTH) _______________IN. _______________IN.
FLAT - DECLINE - FLAT CONVEYOR DESIGN GUIDE
FLAT - DECLINE CONVEYOR DESIGN GUIDE
PLEASE PLACE (X) NEXT TO DESIRED CONFIGURATION (TABLE A) C
BRAND ( ) STOBER ( ) SEW EURO-DRIVE ( ) HUB CITY ( ) BOSTON ( ) TOSHIBA ( ) VAN DE GRAFF ( ) INTEROLL ( ) CHARLYNN ( ) EATON ( ) PARKER _____________________________________________________________________________________ GEARBOX PART NUMBER _____________________________________________________________________________________ GEARBOX TORQUE _____________________________________________________________________________________ GEARBOX FINISH ( ) STAINLESS ( ) PAINTED BRAND ( ) LEESON ( ) BALDOR ( ) MARATHON ( ) BOSTON ( ) US MOTORS _____________________________________________________________________________________ MOTOR PART NUMBER _____________________________________________________________________________________ MOTOR HP _____________________________________________________________________________________ MOTOR RPM _____________________________________________________________________________________ DIM "E" (FLAT BELT LENGTH) _______________IN. DIM "G" (SIDE HEIGHT) _______________IN. DIM "H" (FRAME HEIGHT) _______________IN. F
LEFT SIDE LEFT TO RIGHT
F
"B"
F
"B"
( ) OPTION A
B
CENTER DRIVEN LEFT SIDE RIGHT TO LEFT
CENTER DRIVEN RIGHT SIDE RIGHT TO LEFT
MOTOR SPECS “E” — Upper Flat Belt Length:______ “F” — Lower Flat Belt Length:______ “G” — Side Height (above-belt):______ “H” — Frame Height:______ UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES ESTIMATOR APPROVALS DATE ( ) OPTION F MOTOR AND GEARBOX NOT SHOWN - PLEASE CHOOSE CONFIGURATION FROM TABLE A FRAME MOUNTING B
"H"
"H"
218 20th Ave. Roseville, IL 61473 PHONE: (309) 774-4275 FAX: (309) 774-4161 ( ) CEILING ( ) FLOOR _____________________________________________________________________________________ IF FLOOR MOUNT - PLEASE CHOOSE ONE ( ) RIGID ( ) SWIVEL ( ) CASTER ( ) FORMED SHEET METAL ( ) ANGLE IRON ( ) OTHER ________________________________________________________________________ E
CONFIDENTIAL This drawing contains confidential and proprietary information of Fusion Tech Integrated, Inc. and cannot be used, duplicated or disclosed, in whole or in part, except with the expressed written permission of Fusion Tech Integrated, Inc. ( ) OPTION E
1
2
3
E
E
1
2
3
DRAWN BY
KHL
9/10/2015
DRIVE LOCATION
CHOOSE ORIENTATION IN TABLE A
COMPANY NAME
A
DETAILED BY
KHL
9/8/2015
NAME PROJECT TITLE FUSION TECH INTEGRATED KEY REFERENCE NO. FLAT - DECLINE CONVEYOR DESIGN GUIDE ( ) BEAD BLAST ( ) 2B ( ) DA
A
BEARING HOUSING ( ) IPTCI ( ) EDT _____________________________________________________________________________________ BEARING INSERT ( ) IPTCI ( ) KILLIAN
NOTES:
NET WEIGHT
TOLERANCE UNLESS OTHERWISE SPECIFIED:
BEARING SPECS
TBD
6
5
4
ANGLE 1 FRACTION 1/32" HOLE DIA. .01
.X .06 .XX .03 .XXX .015
ALL THE OPTIONS YOU WANT Choose all the options you want on your conveyor: 8 UNLESS OTHERWISE SPECIFIED DEBUR AND BREAK ALL SHARP CORNERS. 1. UNLESS OTHERWISE SPECIFIED ETCH ALL UP BENDS. 2. UNLESS OTHERWISE SPECIFIED CONTINUOUS WELDS ON ALL SEAMS. 3. ALL WELDS TO BE SMOOTH & FREE OF CRACKS AND PITS. 4.
FINISH
FABRICATED THICKNESS
REV NO. 0
1 ALL THE OPTIONS YOUWANT Choose all the options you want on your conveyor: 2 SCALE 1:12 SHEET 1 OF 1 MATERIAL -- Interpret Drawing per ANSI Y.14.5 BELT LIFTERS ( ) YES ( ) NO SPRAY BARS ( ) YES ( ) NO BELT SCRAPER A
6
5
4
D
D
D
Thursday, September 03, 2015 2:51:22 PM, Y:\Users\Keith L\S800 Conveyors\Flat-Decline\S800 Flat - Decline Conveyor Y:\Users\Keith L\S800 Conveyors\Flat-Decline\
5
4
3
6
7
"C"
( ) ADJUSTABLE DUAL DUROMETER ( ) FIXED 3MM THICK BELTING SCRAPER ( ) WEIGHTED BELT SCRAPPER ( ) ROTARY BELT SCRAPPER
NOTES:
"D"
D
• Frame • Finish • Mounting • Belt
• Gearbox • Motor • Bearing • Add-On Features
"G"
"D"
BRAND _____________________________________________________________________________________ BELT STYLE _____________________________________________________________________________________ BELT SPEC _____________________________________________________________________________________ BELT MATERIAL _____________________________________________________________________________________ BELT COLOR _____________________________________________________________________________________ BELT BACK UP __________________________% BELT SPEED • Gearbox • Motor • Bearing • Add-On Features __________________________FPM BELT FLIGHTS ( ) YES ( ) NO BELT FLIGHT HEIGHT _________________________IN. BELT FLIGHT SPACING ________________________IN. BELT TENSION ( ) NORMAL CATENARY SAG ( ) TAKE-UP BRAND ( ) STOBER ( ) SEW EURO-DRIVE ( ) HUB CITY ( ) BOSTON ( ) TOSHIBA ( ) VAN DE GRAFF ( ) INTEROLL ( ) CHARLYNN ( ) EATON ( ) PARKER _____________________________________________________________________________________ GEARBOX PART NUMBER _____________________________________________________________________________________ GEARBOX TORQUE _____________________________________________________________________________________ GEARBOX FINISH ( ) STAINLESS ( ) PAINTED BRAND ( ) LEESON ( ) BALDOR ( ) MARATHON ( ) BOSTON ( ) US MOTORS _____________________________________________________________________________________ MOTOR PART NUMBER _____________________________________________________________________________________ MOTOR HP _____________________________________________________________________________________ MOTOR RPM _____________________________________________________________________________________ ( ) WIEGHT TAKE-UP ( ) FLIP UP TAKE-UP ( ) NOSE BAR 7
• Frame • Finish • Mounting • Belt
"C"
UNLESS OTHERWISE SPECIFIED DEBUR AND BREAK ALL SHARP CORNERS. 1. UNLESS OTHERWISE SPECIFIED ETCH ALL UP BENDS. 2. UNLESS OTHERWISE SPECIFIED CONTINUOUS WELDS ON ALL SEAMS. 3. ALL WELDS TO BE SMOOTH & FREE OF CRACKS AND PITS. 4.
"E"
Thursday, September 03, 2015 2:51:22 PM, Y:\Users\Keith L\S800 Conveyors\Flat-Decline-Flat\S800 Flat - Decline - Flat Conveyor Y:\Users\Keith L\S800 Conveyors\Flat-Decline-Flat\
5
4
3
8
6
BELT INFORMATION
C
C
"A"
"A"
"F"
See Conveyor Options & Add-On Features for Options.
See Conveyor Options & Add-On Features for Options. C
GEARBOX SPECS
"B"
B
"B"
B
"H"
MOTOR SPECS
CONFIDENTIAL This drawing contains confidential and proprietary information of Fusion Tech Integrated, Inc. and cannot be used, duplicated or disclosed, in whole or in part, except with the expressed written permission of Fusion Tech Integrated, Inc.
UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES
218 20th Ave. Roseville, IL 61473 PHONE: (309) 774-4275 FAX: (309) 774-4161
B
APPROVALS
DATE
ESTIMATOR
15
14
DRAWN BY
KHL
9/10/2015
COMPANY NAME
A
DETAILED BY
KHL
9/8/2015
PROJECT TITLE FUSION TECH INTEGRATED KEY
A
NOTES:
NET WEIGHT
TOLERANCE UNLESS OTHERWISE SPECIFIED:
TBD
NAME
Made with FlippingBook - professional solution for displaying marketing and sales documents online