Installation scenarios
The 52 cm-tall box fits into all standard base units from 74 cm upwards.
sBox
Ensures that the hose on pull-out kitchen taps is smoothly, safely and securely pulled out and retracted. Thanks to the sBox, the pull-out spray can be extended to max. 76 cm. It fits into all standard base units.
Best placement – vertically below kitchen tap: The lower brackets are firmly screwed to the base. The upper brackets can be either screwed to or suspended on the rear panel. The mounting elements can be moved and rotated 360°. This makes installation fast and easy.
At the back of the rear wall, tilted sideways: Laterally tilted installation is an option where there are obstacles on the ground such as waste pull-out or drainage systems, or when the angle valves are difficult to access. The brackets can be screwed to the base, sides or rear panel. Maximum recommended tilt angle: ± 20°.
Vertically below kitchen tap, tilted backwards or forwards: The tilted back assembly is recommended if the rear wall is offset to the front or if there are obstacles on the floor. The brackets are all aligned to the front. This way, the sBox can simply be tilted forwards and clicked out of all brackets. This allows for quick and easy cleaning. The sBox can be tilted backwards or forwards. Maximum recommended tilt angle: ± 20°.
Tilted and offset on the side wall: The installation on the side panel is ideal for corner sinks, sinks with draining boards or sinks with tap holes that are positioned to the side. All the brackets are screwed to the side. You should avoid parallel displacement of the sBox. If dis- placement is required for the installation, there must not be more than 30 mm between the tap and outlet axis of the sBox.
188
Made with FlippingBook Digital Proposal Creator