JET69143
POWER-FLO Throttle Body Whether the worn out throttle body needs replacement or you are looking to upgrade the existing unit, the Power-Flow throttle body is designed to improve air flow and throttle response. The unit features a CNC machined aluminum casting and is pre-calibrated for simple “remove and replace” installation. Part No. Year Model JET76109 2011-16 Camaro, 6.2L JET76116 2016-17 Camaro, 6.2L 2010-16 Camaro 6.2L V8 Performance Programmer JET15008 Take control and program the vehicle to match the driving style. Tri-Power tuning includes three tuning modes designed to operate the engine at peak efficiency based on the octane level being used. Modify air and fuel ratios, ignition timing, shift points, shift firmness, speed limiter and rev limiter settings. A built in scan tool reads and clears diagnostic trouble codes. Programmer plugs into the vehicle's diagnostic port and the easy to use installation software allows making changes by answering simple yes or no questions.
Low Temp T-Stat Add engine longevity as well as improve peak efficiency with a JET low temperature thermostat. The denser air/fuel charge entering the engine results in optimal power and improved engine life regardless of driv- ing conditions. Part No. Year Model JET10175 1998-02 Camaro/Firebird, 5.7L
JET69190
POWER-FLO Mass Air Sensor
Whether it’s eliminating the restrictive OE sensor or maximizing the full potential of an aftermarket cold air intake system, the POWER-FLO mass air sensor improves horsepower, torque, and fuel economy up to 4.5%. The sensor is also compatible with computer upgrades as well as other intake and exhaust power adders. Installs in minutes. Part No. Year Model JET69143 2010-15 Camaro, 6.2L 2015 Camaro, 7.0L JET69180 2012-16 Camaro, 3.6L 2016 Camaro 6.2L, 7.0L JET69191 2017-18 Camaro 6.2L
Off-Road Mid–Pipes Free-flowing mid-pipes are constructed from mandrel-bent stainless
steel, eliminating restriction between the headers and exhaust system. Incorporated, factory style mounts provide a direct, bolt-on installation. Part No. Description 2010-15 Camaro SS 6.2L JBA1812SY 2.5” w/o Cats (For Use With JBA1812S or Factory Manifolds) JBA1812SYC 2.5” w/Cats (For Use With JBA1812S or Factory Manifolds)
JBA6812SD 3” w/o Cats, 3” To 2.5” JBA6812SDC 3” w/Cats, 3” To 2.5” JBA6813SD 3” w/o Cats, 3” To 3” JBA6813SDC 3” w/Cats, 3” To 3” 2016-17 Camaro SS 6.2L
Cat4ward ® Headers Stainless mandrel bent tubing opens up the exhaust for increased perfor- mance and efficiency without compro- mising the factory emission equipment. Extra thick 3/8" CNC laser-cut flanges ensure a tight seal and trouble free- performance without leaks from warping. Each kit includes hardware, gaskets, custom length ignition wire and instruc- tions. Bolt-on installation. Part No. Description 2010-15 Camaro 6.2L V8 JBA1812S 1-3/4" Stainless Steel JBA1812SJT 1-3/4" Titanium Ceramic Coated 2016-17 Camaro 6.2L JBA1818S 1-3/4” Stainless Steel JBA1818SJS 1-3/4” Silver Ceramic
Long Tube Headers Long tube headers have mandrel-bent, stainless steel primary tubes, 3/8” thick laser-cut flanges and Firecone merge col- lectors. Includes hardware, gaskets and O2 extensions. Part No. Description 2010-15 Camaro V8 JBA6812S 1-3/4”, 3” Collector, Stainless Steel JBA6813S 1-7/8”, 3” Collector, Stainless Steel JBA6813SJS 1-7/8”, 3” Collector, Silver Ceramic JBA6813SJT 1-7/8”, 3” Collector, Titanium Ceramic 2016-17 Camaro 6.2L JBA6816S 1-7/8”, 3” Collector, Stainless Steel JBA6816SJS 1-7/8”, 3” Collector, Silver Ceramic
JBA6816SD 3” w/o Cats, 3” To 2.5” (For Use With JBA6816S) NEW! JBA6816SDC 3” w/Cats, 3” To 2.5” (For Use With JBA6816S) NEW!
Performance Exhaust Systems Part No. Description 2010-14, 6.2L LS3 and L99 V8 JBA40-3113 3" Cat-Back w/4" Dual Wall Tips (3" To 3") 2015 Camaro 6.2L V8 JBA40-3119 3” Cat-Back w/4” Dual Rear Exit Tips (For Use With OEM or 2-1/2” Mid-Pipe NEW!
100
CAMARO PRODUCTS
Made with FlippingBook flipbook maker