LS1/LS6, 6 Quart Fabricated Aluminum Oil Pan MOR21150 Fabricated, clear zinc plated aluminum pan with billet rail fits 1998-02 Camaro with LS1/ LS6 engines. 6" deep pan has a 6 quart ca- pacity, windage tray, -10AN fitting (for remote filter), oil pickup and trap door oil control baffle. Pan accepts up to 4.125" stroke with most steel rods. Sold with windage tray and oil pump pickup. Recommended Pickup And Pump Part No. Description MOR24050 Replacement Pickup For Stock Pump Or MOR22120 MOR22120 Moroso HV Race Oil Pump
LT-1, 5-1/2 Quart Camaro Oil Pan MOR20185 Clear zinc plated steel pan fits 1993-97 Camaro with LT-1 engines. 7-1/2" deep pan has a 5-1/2 quart capacity, kicked out sump, windage screen, 20mm oil level sensor fitting and trap door oil control baffle. Pan accepts up to 4.125" stroke with most steel rods, uses stock dipstick and clears most headers. Recommended Pickups Part No. Description MOR24212 Pickup For Stock Oil Pumps Or MOR22101 MOR24213 Pickup For SBC HV Race Pump MOR22111
1993-97 Camaro Solid Motor Mount Pad Kit MOR62635 Solid mount pads replace soft rubber- cushioned frame mounts as OEM equip- ment. The pads control excessive engine movement, prevent linkage binding and eliminate the need for torque straps. Pads are made from Zink and have yellow chro- mate plating. Two per pack.
Coolant Expansion Tank MOR63813 NEW! Direct, bolt-in aluminum tank replaces the stock, two-piece plastic tank found in all 2016-18 Camaro that often fails after repeated, high heat occurrences. Fully fabricated tank, which may be polished, chromed, painted or powder coated as desired, includes a billet aluminum radiator neck to accept the factory cap. Incorporat- ed sight tube eases coolant level scrutiny.
Automatic Transmission Pan Fully fabricated aluminum pan, which fits all 6L80E automatic transmission-equipped 2010- up Camaros, provides increased fluid capacity and improved durability. Pan holds 9.2 quarts, includes one-piece billet rail for reliable sealing, magnetic drain plug and oil level check. Sold complete with stainless mounting hardware. Part No. Description MOR42030 GM 6L80E Transmission Pan MOR97002 Replacement Drain Plug
GM LS Series Oil Pan MOR20139 NEW! Engineered for 1998-02 Camaro/Firebird with GM LS engine and 1993-02 Camaro/Firebird with LS swap, clear zinc plated steel oil pan features a 7-quart capacity with drag race-proven trap door assembly and anti-slosh baffle that improves oil control. Pan clears up to 4.25” stroke with most steel rods and may be used with MOR22941 wind- age tray. Included billet aluminum oil filter allows use of a MOR22463 or OEM oil filter. Uses OEM dipstick. Pickup must be purchased separately. Part No. Description MOR20139 GM LS Series Oil Pan MOR24050 Oil Pump Pickup, Fits OEM or MOR22120 High Volume Race Oil Pump
Air/Oil Separator Kits Kits are plumbed into the vehicle’s PCV system, capturing excess crankcase vapors and oil mist and preventing them from entering the intake tract. Original size, large body units offer 43% more capacity, while small body units fits easily in more applica- tions. Offered with polished or black anod- ized finish, each unit is sold complete with inlet and outlet fittings, rubber supply hose and billet aluminum mounting clamps. Part No. Description MOR85487 2010-15 Camaro SS, 2012-15 ZL1, Large Body, Polished MOR85652 2010-15 Camaro SS, 2012-15 ZL1, Small Body, Polished NEW! MOR85653 2010-15 Camaro SS, 2012-15 ZL1, Small Body, Black Finish NEW! MOR85493 2010-15 Camaro SS w/Edelbrock Supercharger, Large Body, Polished NEW! MOR85634 2010-15 Camaro SS w/Edelbrock Supercharger, Small Body, Polished NEW! MOR85635 2010-15 Camaro SS w/Edelbrock Supercharger, Small Body, Black Finish NEW!
MOR74246
MOR74247
MOR74248
2010-15 Camaro Accessories Part No. Description MOR74246 Brake Reservoir Cover MOR74247 Fuse Box Cover MOR74248 ABS Pump Cover, Camaro Hardtop
105
CAMARO PRODUCTS
Made with FlippingBook flipbook maker