Thundervolt 50 10.4mm Custom Fit Ignition Wire Set TAY98003 Wires have 50OHMS per foot resistance, three layers of pure Zimplex silicone, 102,000 volt. dielectric strength and 600° heat
8mm Spiro Pro Custom Fit Ignition Wire Set TAY74244 Spiro-wound with stainless steel wire these wires
are covered with a conductive fluorocarbon material. OEM resistor core wires eliminate radio frequency interference. Two layers of silicone. Red color. Fits 2010-14 6.2L V8 SS Camaro and 1998-02 Camaro 5.7L.
protection with out additional sleeving. Tightly woven heat treated fiberglass braid and pure silicone pro boot are bonded to wire. Black color. Fits 2010-14 6.2L V8 SS Camaro.
Rollstop Kit TCI861735 Perform consis-
tent, reliable burn- outs. Rollstop kit may be installed into 2010-up Camaro without the need for brake system modifications. Precision solenoid is manufactured from
GM LS1 Flexplate TCI399753 Rigid, high tensile steel flexplate, which fits 1998-02 168-tooth internally-balanced LS1 applications using 4L60E automatic transmis- sions, is significantly stronger than the OEM unit, and is resistant to cracking and elonga- tion. Flexplate, which meets SFI specifications, is .035” thicker than the OEM unit and is sized for 3/8” mounting bolts.
6061-T6 billet aluminum, incorporating a waterproof design and a valve capable of withstanding 3,000 PSI. Sold complete with solenoid, mi- croswitch, in-line fuse connector and necessary hardware for a custom installation.
NEW VENDOR
2010-17 Camaro Pump
TOST40RBZ28 NEW! Turn One's 5th Gen Camaro pump is a direct bolt replacement for the stock pump. Great for street or track use, our pump is designed to save you up to 3hp and reduce the power steering fluid temperature.
Power Steering Pulley TOSMFGTUR17 NEW! The Turn One billet aluminum pulley is designed for use with our 2010-17 Camaro pump (part number TO- ST40RBZ28) only. Durable enough to withstand the demands of high perfor- mance driving.
Driveshaft Tunnel Brace Heavy duty, direct bolt-in brace, which fits 2010-14 Chevy Ca- maro, replaces the OEM unit, reinforcing the driveshaft tunnel and helping to reduce chassis flex. Uses the factory hardware. Application Black Part No. Red Part No. 2010-14 Chevy Camaro UMI2500-B UMI2500-R
Rear Trailing Arms/Toe Rod Kit Rear suspension kit for 2010-14 Chevy Camaro includes a pair of heavy duty rear trailing arms and a pair of toe rods to help improve traction, elimi- nate wheel hop and increase rear end stability. USA-made components are fabricated from 1" x 2" rectangular tubing, fitted with greasable polyure- thane bushings and include a corrosion-resistant black or red powder coated finish. Direct bolt-on kit uses the factory hardware. Application Black Part No. Red Part No. 2010-14 Chevy Camaro UMI251520-B UMI251520-R
119
CAMARO PRODUCTS
Made with FlippingBook flipbook maker