Trailing Arms Rectangular steel trailing arms and braces have a .120" wall for maximum strength and greaseable, polyurethane bushings. Sold in pairs. Suspension Application Guide
Adjustable Panhard Rods Replace factory Panhard rod with one made of 1-1/4" cold rolled steel tubing.
Trailing Arms
Description
Lower
Panhard Rod QA15202 QA15202
1993-97 Firebird 1998-02 Firebird
QA15204 QA15204
Hydraulic System Adjuster RAM78300 Adjust clutch pedal position in virtually any vehicle that uses an internal hydraulic slave cyl- inder. Unit plumbs inline with the feed line from the slave cylinder and is compatible with all factory or aftermarket hydraulic clutch release bearings.
Street Hydraulic Release Bearings RAM78125HD For applications where the standard release mechanism may not fit. Bearings feature .700" travel, and work with up to a 3/4" master cylinder. T56 kits include all hardware to adapt to the OEM master cylinder. Fits 1998-02 LS1 Firebird.
HDX And Powergrip Clutch Sets
Ram HDX clutch sets feature increased clamp loads and a high performance street organic disc. Discs are built with the exclusive 8-spring hub and poly coil springs for excellent strength and durability. HDX sets provide the smoothest engagement for street driven cars. For perfor- mance street/strip cars, Powergrip sets include the same increased clampload pressure plates with a 900/300 series friction material for a bal- ance between driveability and holding power up to 550 hp at the wheels. Make Size Spline HDX Powergrip GM Firebird Cars 1993-97 11.0" x 1-1/8" 26 RAM88516HDX RAM98516
Force 9.5 and 10.5 Dual Disc Clutch Systems Force 9.5 and 10.5 clutches combine the benefits of smooth driveability and easy pedal effort with extreme holding power. The strapped floater plate eliminates noise at idle. Force 9.5 are suited for applications with up to 750 horsepower, while the 10.5 is for use in ve- hicles with up to 1,000 horsepower. Designed as a bolt-in for late model vehicles, kits are sold complete with a billet aluminum flywheel.
True Balance Billet Flywheels
Ram flywheels are ready to bolt in – out of the box. Each unit is CNC machined, surface ground parallel to the crank flange, and preci- sion balanced. Make Ring Gear Balance Steel Aluminum Small Block LS1 168-Tooth Internal RAM1550 RAM2550
GM LS1 Firebird 1998-02
11.0" x 1-1/8" 26 RAM88931HDX RAM98931
Force 9.5 Part No.
Force 10.5 Part No.
Application
GM LS1 1-1/8”-26 Spline, 168T Flywheel, “O” Balance
RAM75-2100 RAM80-2100
159
PONTIAC PRODUCTS
Made with FlippingBook flipbook maker