Ring And Pinion Installation Components Ratech offers a complete line of differential service parts. Whether installing a new set of gears or making a repair, Ratech has just what is needed.
Smart Sleeve Innovative new crush sleeve design offers eased installation and improved reliability. During installation, the Smart Sleeve requires only 130-150 ft./lbs. of torque, compared to the 300-400 ft./lbs. required for traditional crush sleeves, and the unique design offers improved cycle duty when compared to solid spacers.
RAT11001
Installation Kits Basic Kit: pinion shims, crush sleeve, pinion seal, cover gasket Installation Kit: pinion shims, carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts, cover gasket Bearing Kit: pinion and carrier bearings Complete Set: All small parts and bearings to complete a ring and pinion installation. Housing Basic Inst. Kit Installation Kit Bearing Kit Complete Kit Ford 8.8" 2007-12 GT500, Roush, Shelby, Saleen '10-14 All Mustangs RAT405K RAT105K — RAT387K 1994-09 Mustang RAT405K RAT105K RAT205B RAT305K 1994-09 Mustang (Kits Include A Smart Sleeve) — RAT4005K — RAT5005K
Individual Component Parts Whether it's carrier bearings or just a pinion nut, Ratech components will complete the rear end overhaul. Housing Crush Sleeve/ Smart Sleeve Pinion Seal Pinion Nut Ring Gear Bolt Cover Gasket Head Bearing Tail Bearing CarrierBearingSet Pinion Shims Carrier Shims
Ford 8.8" 2007-12 GT500, Roush, Shelby, Saleen 2010-14 All Mustangs
RAT1100 RAT1126 RAT3104/
RAT11001 RAT6105 RAT1502 RAT1316 RAT5122 — RAT8003 RAT9001
1994-09 Mustang
RAT1100 RAT1126 RAT3104/
RAT11001 RAT6105 RAT1502 RAT1316 RAT5122 RAT7005 RAT8003 RAT9001
Ford 8.8" Ring and Pinion Gear Sets • Housing 10 Holes, 10-9/16" x 10-13/16" • 8.8" Diameter Ring Gear • 1.626" Diameter Pinion, 30-Spline Installation Kit RIC83-1043-1 Part No. Ratio Teeth RIC49-0103-1 3.55 39-11 RIC49-0104-1 3.73 41-11 RIC69-0310-1 4.10 41-10
2005-10 Mustang Billet Hood Pin Kit RIB50050-5521N Hood pin kit has a natural finish and is machined from 6061-T6 billet aluminum. The base screws into hood bump location with only minor modifications. Kit has a stainless steel locking pin for a secure closure and the locking pin adjusts to the angle of the hood. Installation hardware and instructions are included.
58
MUSTANG PRODUCTS
Made with FlippingBook flipbook maker