2005-14 Mustang Rear Chassis X-Brace STD555-5093 Stiffen the Mustang Chassis without sacrificing the rear seat. The X-Brace fits between the rear wheel wells, behind the rear seat, to effectively tie the rear chassis structure together for rigidity. May be bolted in, or welded for maximum effectiveness.
Steel Strut Tower Brace STD555-5716 Brace fits 2005-10 Mustang GT equipped with a factory plenum cover from Ford’s optional ap- pearance package. Slight modifications may be necessary for clearance.
Lightweight Radiator Support STD555-5080
Tubular support is half the weight of the stock unit. Reduces front end weight, and is strong enough to support the front sway bar when not at the drag strip. Perfect for road course/autocross reduces front weight distribution in the turns. Works with or without factory Z-brace, and aftermarket sway bars. Fits 2011-14 Mustang V6/V8.
Billet Water Pump Pulley STD555-3362 Billet aluminum pulley, engineered for 2011-14 Ford Mustang 5.0L, weighs one third less than the OEM unit, reducing rotating mass and enhancing perfor- mance. Easy to install, pulley causes no changes in water pump flow and uses the existing serpentine belt. Includes stainless fasteners.
Billet Idler And Tensioner Pulley Kit STD555-3361 Crafted from lightweight, billet aluminum, idler and tensioner pulleys are machined to OEM spec. Double sealed bearings are for added durability. Fits 2011-14 Ford Mustang GT 5.0L.
Billet Oil Separator STD555-3712
The separator is crafted from aerospace grade billet aluminum for lightweight and hi-tech looks. Connects to PCV hose to prevent oil and crankcase vapors from getting into the intake manifold, and decreasing fuel octane. Engraved with 5.0 logo. Fits 2011-14 Mustang GT.
Supercharger Pulley STD555-3345 Designed for Shelby GT500, pulley directly replaces the OEM unit and adds approximately 3 PSI more boost. Billet steel pulley is nickel plated for durability and great looks. Fits 2007-10 Shelby GT500 with manual transmission.
Clutch Quadrant, Cable And Adjuster Package Patented double-hook clutch quadrant is compatible with firewall adjusters and cables. Smooth sliding clutch cable can be adjusted at the bellhousing or the firewall. Part No. Description
Underdrive Pulleys Billet steel pulleys slow belt-driven acces- sories by 25% for a gain of 8-10 horse- power. Three-piece set includes hardware for installation. Part No. Description STD701-0001 1996-Early 01 Mustang GT 4.6L STD701-0003 Mid-2001-04 Mustang GT 4.6L
STD555-7040 1994-95 Mustang STD555-7041 1996-04 Mustang
Heavy Duty Upper Rear Control Arms
Upper rear control arms are available in heavy duty and heavy duty, double adjustable versions. Both are polyurethane bushed and will improve handling and traction. Double adjustable arms allow adjustment of pinion angle for maximum traction. Sold in pairs Part No. Description STD555-4100 Heavy Duty Double Adjustable Upper Rear Control Arms,1994-04 Mustang STD555-4096 Heavy Duty Upper Control Arm 2005-10 Mustang, Lowered Vehicle STD555-4098 Heavy Duty Upper Control Arm 2011-14 Mustang, Lowered Vehicle
Bumpsteer Kits Kits replace stock outer tie rods to keep car straight prevent bumpsteer caused by changes in toe during suspension movement. Kits include two spherical rod ends, heat treated alloy steel shafts, CNC-machined aluminum collars and a shim assortment. Part No. Description STD555-8104 1994-04 Mustang STD555-8106 2005-14 Mustang
1994-04 Mustang 3-Bolt Caster/Camber Plates STD555-8094-3 TIG-welded, nickel plated plates allow pre- cise caster and camber adjustment. Spherical bearings maintain precise alignment in all driv- ing conditions. Each pair includes hardware and instructions.
64
MUSTANG PRODUCTS
Made with FlippingBook flipbook maker