ProFlow Cold Air Intake Kit STD555-3159 The ProFlow Mustang intake system from Steeda uses the highest flowing nano-fiber air filter and the famous “race tested” velocity stack entry, a stainless steel heat shield, and a larger MAF housing. Fits 2011-14 Mustang V6.
Heavy Duty Race Engine Mounts STD555-4005 Sturdy mounts replace stock 2005-14 (GT Bullitt / Boss) 4.6L Mustang’s Hydra-Bushing mounts for added durability and improved header clearance. Sold in pairs
Cold Air Intake Kits Kits use a stainless steel air box with built-in velocity stack, mounted in the OEM location. The supplied rubber trim seals it against the hood and fender, keeping hot air out. Included lifetime air filter may be cleaned and re-oiled for easy filter maintenance. Part No. Description STD555-3120* 2005-09 Ford Mustang 4.6L STD555-3135 2007-09 Ford Mustang Shelby GT500 STD555-3152 2010 Ford Mustang 4.6L STD555-3155 2011-14 Ford Mustang 5.0L, Manual Trans. STD555-3156 2011-14 Ford Mustang 5.0L, Auto Trans. * Air intake elbow not included.
Heavy Duty Upper Strut Mounts STD555-8120 Heavy duty, direct replacement upper strut mounts eliminate the “popping” sound when the OEM mount fails. Mounts also allows an extra 1° of camber in each direction. Sold in pairs. Fits 2005-10 Ford Mustang V8/V6, 2007-14 GT500
Charge-Motion Plates STD555-3125 Charge-motion plates directly replace the restrictive OEM plates and install between the cylinder heads and intake manifold of 2005-08 4.6L Mustangs. Charge-motion plates are CNC-machined from premium 6061-T6 billet aluminum plates have no nitrous ports. Sold per pair.
Heavy Duty Panhard Bar Brace STD555-2555 Panhard brace stiffens the Panhard bar mounting bracket under load during corner- ing and provides some extra chassis rigidity as well. Fits 2005-14 Mustang.
Sport Spring Kits STD555-8200 Improve the appearance and handling of 1994- 04 Mustangs without affecting ride quality. Kit installation lowers the car approximately 1". Each kit includes two front and two rear coil springs.
X2 Ball Joints STD555-8101 Ideal for lowered 1994-04 Mustangs, custom length ball joints raise the roll center, enhance handling and reduce body roll. Oversized sway bars and/or increased spring rates are not needed. Steeda bump steer kit (STD555-8104) is recommended. Sold in pairs.
Speedometer Recalibration Drive Gears For 1994-98 Mustang manual or automatic transmissions. Used for speedometer recali- bration when differential gear ratios have been changed. Drive Gears sold individually. Part No. Description Gear Ratio
Manual Trans., 7-Tooth Drive Gear, 1996-98 Cobra 5-Speed, Tremec TR-3550 And TKO Manual Trans., 8-Tooth Drive Gear, 1994-98 5-Speed (Except 1996-98 Cobra)
X11 Ball Joints STD555-8136 Steeda’s X11 ball joints are longer and stronger, designed to raise the front roll center which becomes lower as a result of lowering springs or and air adjustable hide height system. Raising the roll center eliminates issues as cornering grip, increased body roll, and increased understeer. Sold in pairs and fits 2011-14 Mustang.
4.10
STD392-STE-17271-D
3.55 And 3.73
STD392-STE-17271-J Auto Trans., 8-Tooth Drive Gear, 1994-98
3.55 And 3.73
65
MUSTANG PRODUCTS
Made with FlippingBook flipbook maker