NEW VENDOR
Lowering Spring Kits NEW! Springs are manufac- tured from chrome silicon
high-tensile spring wire and cold wound on a CNC coiling machine for unsurpassed quality and consistency. Springs are additionally stress-
Heavy Duty Trailing Arms NEW! Heavy duty Trail- ing Arms eliminate
Strut Tower Braces NEW! Designed to solidly link the front strut towers, adding strength to the entire front unibody and suspension, bolt-on Strut Tower Braces are manufactured from a mix of DOM steel tubing and laser-cut steel plate. Offered with black hammertone or red powder coated finish. Red Part No. Description Black Part No. BMRSTB001R* 1993-02 Camaro — BMRSTB017R 2011-15 Camaro BMRSTB017H BMRSTB018R 2016 Camaro — *Will not fit vehicles with FAST 102mm intake manifold or 1993-97 SS models.
deflection, while reducing wheel hop and increasing handling qualities. Single adjustable arms are constructed
relieved at 750° F., ensuring stresses induced during the winding process are eliminated. Shot-peening is then used to eliminate residual surface stresses. Finally, every single spring is computer tested to confirm quality control. Springs are red powdercoat finished. Part No. Description BMRSP001R 1993-02 Camaro, 1-1/4” Drop Front And Rear BMRSP002R 1993-02 Camaro, 1-1/4” Drop Front Only BMRSP003R 1993-02 Camaro, 1-1/4” Drop Rear Only BMRSP019R* 2010-15 Camaro V8, 1” Drop Front And Rear BMRSP022R* 2010-15 Camaro V8, 1.4” Drop Front And Rear BMRSP025R* 2010-15 Camaro V8, 1.4” Drop Front And 1” Rear BMRSP041R 2016-17 Camaro V8, 3/4” Drop Front And 1” Rear BMRSP052R 2016-17 Camaro V6, 1.2” Drop Front And Rear BMRSP077R* 2010-15 Camaro V8, 1-1/4” Drop Front And Rear * Not recommended for convertibles.
from rigid, tubular steel. Offered with red powder coated finish. Sold per pair with necessary hardware. Part No. Description BMRTCA060R 2016-17 Camaro Lower Trailing Arms, Single Adjustable BMRUTCA062H 2016-17 Camaro Upper Trailing Arms, Single Adjustable Rear Cradle Bushing Kit BMRBK061 NEW! Designed exclusively
Driveshaft Tunnel Brace BMRDTB006R NEW! Rigid, CNC laser-cut ¼” aluminum plate, designed exclusively for 2016 Camaro, is engineered to stiffen the OEM floor and transmission tunnel area. Offered with red powder coated finish.
Differential Bushing Kit BMRBK058 NEW! Heavy duty, polyurethane
for 2016 Camaro, kit sig-
bushing kit helps elimi- nate deflection, thereby reducing wheel hop and increasing rear stability in 2016-17 Camaro.
nificantly reduces rear cradle
Motor Mount Kit BMRMM009 NEW! Heavy duty, poly- urethane motor mounts eliminate
Driveshaft Safety Loop BMRDSL019R NEW! movement through reduced deflection. Polyurethane, 95-durometer bushings of- fer high stiffness, low friction and excellent stability.
Required by NHRA on any drag car quicker that 13.99 E.T. or any car fitted with slicks, safety loop is designed to contain the driveshaft in the event of a U-joint, yoke or shaft failure. Made from ¼” CNC-formed plate steel, bolt-in safety loop fits all 2016 Camaro. Offered with red powder coated finish.
engine movement and wasted horsepower caused by deflection. Far superior to the stock motor mounts. Fits all 2016-17 Camaro. Offered with red powder coated finish.
Chevrolet LS3 6.2L Camaro Throttle Body It is available in two ver- sions, the 95mm for slightly modified cars or 102mm for supercharged and
BBK1789
BBK1543
highly modified Camaros. Utilizes the factory elec- tronic motor drive. Bolt on up to 10-15 HP depending on application. Part No. Description BBK1789 2010-15, 95mm Performance Throttle Body Assembly BBK1790 2010-15, 102mm Performance Throttle Body Assembly (Includes 1/4" Adapter Plate)
GM LT-1 Fits all 350 LT-1 applications. Direct bolt-on and legal in 50 states. Part No. Description
1998-03 GM LS1 Camaro/ Firebird With Cable Style Throttle BBK1709 Uses stock cable or wire throttle control. Bolt on 7-10 horsepower in minutes. 80mm.
BBK1543 1994-97, Twin 52mm, LT-1 BBK1544 1994-97, Twin 58mm, LT-1
SSI-Series Intake Manifolds For GM LS1 BBK5004 Designed for the popular LS1 equipped Camaro, the BBK series intake manifold delivers unmatched per- formance and value when compared to other aftermarket units. This manifold delivers 18-24 horespower on the base LS1 equipped GM models. Such highlights include a standard 85mm straight through design throttle inlet and low restrictive rounded runners for maximum horsepower as well as improved low end torque for great street or strip performance. For ease of installation this BBK SSI-Series manifold utilizes factory rubber o-ring gaskets and includes all required mounting hardware for installation Camaro '98-02.
83
CAMARO PRODUCTS
Made with FlippingBook flipbook maker