Heavy Duty Adjustable Toe Links DSE042302 Significantly stronger than the stamped steel OEM rear toe links, heavy duty adjustable units provide improved handling, traction and performance. Toe links utilize cross-axis pivot bushings for reduced deflection and are sold complete with eccentric eliminator washers, eliminating the OEM adjusters that are prone to slipping and creating unwanted changes in alignment. 2010-15 Camaro
Engine Mount Kit DSE060430 Direct replacement mounts secure the engine and reduce the powertrain shake associated with soft, OEM mounts. Mounts are constructed using black anodized, billet aluminum housings with powder coated steel brackets. An adjustable feature allows moving the engine to the rearward up to 1" in 1/4" increments, and downward up to 1/2" in 1/4" increments, if desired. Fits all 2010-15 Camaro V8.
Driveshaft Loop Kit DSE011204
Direct bolt-on Driveshaft Loop Kit, which fits all 2010-15 Camaro V8 with 6-speed au- tomatic or manual transmission, meets strict NHRA requirements. Black powder coated driveshaft loop is 1/4" thick x 2" wide, clears the OEM exhaust and will not affect ground clearance. No drilling or cutting required for installation. 2010-15 Camaro
Front Coil-Over Conversion Kit DSE030320 Direct bolt-on coil- over assembly replaces the OEM front struts, lowering the car ap- proximately 1-1/2" for improved stance, handling and performance. Street Kit features DSE/JRI high performance aluminum struts with custom, “Detroit Tuned” valving. An adjust- able aluminum spindle
Solid Rear Cradle Mounts DSE041510 Heavy duty, billet aluminum cradle mounts eliminate wheel hop and drivetrain oscillations caused by rear cradle movement. Mounts ad- ditionally strengthen the rear structure of the vehicle, improving handling. Mounts feature a corrosion resistant black anodized finish. Fits all 2010-15 Camaro.
Adjustable Lower Control Arms DSE042304
Adjustable Lower Control Arms are manu- factured from boxed, HSLA steel and are designed to offer increased traction, handling and performance to the 2010-15 Camaro.
bracket allows ride height to be adjusted with- out affecting strut travel, while the top spindle mounting hole uses removable inserts that allow camber to be adjusted in 1/16” increments. Fits all 2010-15 Camaro.
Rear Coil-Over Conversion Kit DSE042430 Directly replaces the rear OEM strut assembly with DSE/JRI high performance aluminum shock absorbers that include custom, “Detroit Tuned” valving. Conversion kit lowers car approximately 1-1/2", while improving stance, handling and performance. Kit installation allows performing easier ride height adjustments and spring changes. Fits all 2010-15 Camaro.
89
CAMARO PRODUCTS
Made with FlippingBook flipbook maker