Safety training
G WO Advanced Rescue Training Standard / V6 02032026
a. how to enable a passive setup by pulling the rope’s end from the rope bag through the device and attaching it to the injured persons harness, enabling a reverse passive setup
b. how to rig a configuration where the passive setup loaded rope’s end is deviated through a pulley in the transition piece crane boom (or similar) and the rescue device is attached within reach on the transition piece (or similar) and can be controlled without the risk of a fall from height
c. how to secure the rope by securing the hand wheel or locking mechanism
d. how to control the descent using the devices friction component or by applying a deflection connector
The participants shall:
a. how to enable a passive setup by pulling the rope’s end from the rope bag through the device and attaching it to the injured persons harness, enabling a reverse passive setup
b. how to rig a configuration where the passive setup loaded rope’s end is deviated through a pulley in the transition piece crane boom (or similar) and the rescue device is attached within reach on the transition piece (or similar) and can be controlled without the risk of a fall from height
c. how to secure the rope by securing the hand wheel or locking mechanism
d. how to control the descent using the devices friction component or by applying a deflection connector
ELEMENT 2.3 - DROPPED O BJECTS PREVENTION AND
SAFE TETHERING PRACTICES
Learning objectives:
25) The participants can show interest and have awareness of tethering and safe working practices in demanding situations such as emergency procedures and drills, where tools and equipment may be hastily handled or misplaced (Ability, basic level)
26) The participants can take responsibility for identifying loose items that could potentially become a dropped object (Ability, intermediate level)
Global Wind Organisation ©2026 / www.globalwindsafety.org
109 / 214
Made with FlippingBook. PDF to flipbook with ease