Safety training
G WO Advanced Rescue Training Standard / V6 02032026
Hub, Spinner and Inside Blade Rescue - Refresher Training
Practical
1:4
Table 10.2.1 - GWO Hub, Spinner and Inside Blade Rescue
– Refresher training instructor to course participant ratio
10.3 Hub, Spinner and Inside Blade Rescue Refresher Training Timetable
The timetable specifies the sequence and approximate duration of the lessons and elements in this section. This sequence defines the intended progression and shall be followed. Minor re -ordering within a single lesson (for example, placing a short discussion b efore a demonstration) is acceptable if all learning objectives are met, but elements shall not be moved across lessons or delivered out of sequence. The delivery of this module must comply with the requirements described in the GWO Requirements for Training.
Lesson
Element
Duration
Safety instructions and emergency procedures
1.I1ntroduction to the training
1.1
1.2
Facilities
1.3
Introduction
1.4
Scope and main learning objectives
1.5
Motivation
Ongoing assessments (participant performance assessment form)
1.6
1.7
Human factors
TOTAL
15 min.
Emergency response plan in own organisation
2.Emergency response plan in own organisation
2.1
2.2
Rescue strategy
Dropped objects prevention and safe tethering practices
2.3
TOTAL
30 min.
3.Measures to prevent injury during training
3.1
Control measures and warm up
Manual handling focus relevant to hub/spinner/blade rescues
3.2
TOTAL
20 min.
4.Packaging the injured person
4.1
Packaging the injured person
4.2
Use and limitations of cervical collar
Global Wind Organisation ©2026 / www.globalwindsafety.org
67 / 214
Made with FlippingBook. PDF to flipbook with ease