AVR400 System User Guide
maximum electrical safety and minimal risk to the equipment, adhere to the following guidelines: • Ensure that the power receptacles for the AC adapters are properly grounded 3-prong polarized 100-240VAC for use in North America or appropriate safety-rated receptacles for use outside of North America. • Do not operate the systems with housings open except for service by a factory trained technician. • Keep liquids away from the systems, and do not operate the equipment in excessively humid conditions, as water can cause short circuits. • Keep metal filings away from the systems, as such debris can cause short circuits. • Do not operate the equipment around volatile or flammable solvents, as local electrical heating could cause ignition. • Disconnect power, or do not plug in the power cord, if hazardous conditions exist such as a damaged or frayed power cord, a damaged or improperly grounded power receptacle, equipment exposure to liquid spills or excessive moisture, or impact damage. Have the system inspected by authorized personnel before operating. There are no fuses or user-serviceable items in the systems. Systems should only be opened by a factory-trained service technician. Mechanical Safety • The AVR system weighs 330 pounds (150 kg) and is heavy. To avoid injury, use a lifting device to move the system. • Motion of the metrology unit is motorized. Motion can be under full computer control or simply under joystick and trackball control with the computer turned off. There are pinch points. Do not place your hands or mechanical items at or near pinch points. System Emergency Stop The red button located on the top of the joystick is an emergency stop switch. Refer to the following figure. Refer to the following table for the functionality of the emergency stop switch.
Emergency stop switch
Figure 1. Joystick Emergency Stop Button
10 of 62
Uncontrolled When Printed
9985 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online