AVR400 System User Guide
If the emergency stop is… While
Then…
Engaged
The M3 software is performing the auto-homing sequence
All motion will cease, and a dialog box will display the following message: “An error occurred while auto homing. Measurements will be compromised.” Nothing further will happen. The system will resume normal functions, and the auto-homing sequence will need to be re-run. All motion will cease, and a dialog box will display the following message: “The program has been interrupted [SIC] by a hardware error? A CNC E- Stop error occurred. An E- Stop Error occurred on axis 1. An E-Stop Error occurred on axis 2. An E-Stop Error occurred on axis 3.” The system will resume normal functions, and the program will need to be re- run from the start. Any data engaged will be saved and can be viewed/exported as normal. All motion will cease, and a dialog box will display the following message: “The program has been interrupted [SIC] by a hardware error? A CNC E- Stop error occurred. An E- Stop Error occurred on axis 1. An E-Stop Error occurred on axis 2. An E-Stop Error occurred on axis 3.” collected before the Emergency stop was
Disengaged
The M3 software is performing the auto-homing sequence
Engaged
While an M3 program is running
Disengaged
While an M3 program is running
Engaged
When a user attempts to run a program
11 of 62
Uncontrolled When Printed
9985 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online