AVR400 System User Guide
6. System Operations This section provides information on the following operations for the AVR systems: • Powering on the system • Using the system controls • Verifying basic M3 software operations • Operating the workstation • Using parts fixturing 6.1 Powering On the System Power Switches AVR systems have two power switches. • On/Off rocker switch on the right side of the AVR system. Refer to the following figure. • Power button on the front of the system PC.
I/O Panel
Power Switch
Figure 21. AVR Power Switch The pendant with the joystick and trackball is powered by the metrology unit. Turn the system off when not in use. Caution Before removing power, close all computer files and applications, and then shut down the computer using the Windows “Shut down” function. Otherwise, computer files could be corrupted by the sudden loss of power. Procedure To power on the system, perform the following steps: 1. Power on the AVR system by pressing the Power On/Off switch on the side of the unit to the “I” position. Refer to the previous figure. 2. Power on the mouse by moving the switch on the bottom of the mouse to the On position.
39 of 62
Uncontrolled When Printed
9985 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online