AVR400 System User Guide
6.5 Fixturing Parts Parts must be fixtured securely to prevent part movement during measurement. In addition, proper alignment of the part to the stage can aid in measurement. If the part is off-axis from the stage, X-Y-Z measurements will not correlate as well with the part dimensions. Aligning the part with the X, Y and Z axes of the system will improve dimensional measurements. Orientation errors, or skew errors, can also be removed by creating a reference frame based on the part before taking measurements. Refer to the MetLogix M3 Video and FOV Inspection Software User’s Guide for details. The following figure provides the location of the tooling holes on the system. Use these locations to customize the system to your operating requirements.
Figure 24. AVR400 Tooling Holes
6.6 Accessing System Electronics The back of the AVR system is hinged and holds a compartment with electronics and other components of the system. There are no user serviceable parts in this location. Removing the two Phillips screws provides access to this compartment.
43 of 62
Uncontrolled When Printed
9985 Revision A
Made with FlippingBook - professional solution for displaying marketing and sales documents online