Greg’s Tech Tip:
REMOVING OUTER HOUSING FROM GRS MACHINES. Removing the outer housing is an easy way to have full access to the internal workings of the GRS Engraving Machines.
1
REMOVE AIR FILTER Loosen, but do not remove air filter bracket screw. Unplug hose from back of machine. Slide air filter and bracket up to remove.
2 3 4
LOOSEN BOTTOM SCREWS Loosen, but do not remove 8 total screws: 3 bottom screws on each side and bottom 2 on front. REMOVE TOP SCREWS Remove 4 total screws: top 2 on front and back.
800-835-3519 ASK FOR GREG GENTRY
• GUIDED SELF-REPAIR • RECOMMENDED MAINTENANCE • SCHEDULE SHIP-IN REPAIRS
LIFT HOUSING OFF Using secure grip, slowly lift housing up to remove.
IF YOU FIND YOUR GRS MACHINE ISN’ T PERFORMING LIKE IT ONCE DID, IT MIGHT BE TIME FOR SERVICE OR REPAIR. REPAIR IS GREG GENTRY’S MAINSTAY AND PASSION. He was a GRS customer for several years before taking on a job in Emporia as a resident service technician and repairman for GRS equipment.
Housing does have a correct orientation. If the screws don’t slide into the notches when replacing the housing, remove the housing again and rotate it 180° before placing it back on the machine.
PLEASE NOTE:
27
@GRSTOOLS
2021 SUMMER
Made with FlippingBook Ebook Creator