Convergence and broadband Hand in hand with the development and deployment of digital transmission techniques has come the realisation that all the information contained in television, telephony and high speed data services such as the Internet can be converged before delivery to the subscriber’s equipment. The concept of convergence of all the information contained in these various services has also brought about the need to make a broadband connection to the subscriber if the length of time taken to download the necessary data is not to be prohibitively long and thereby unattractive. Articles such as Upgrading fibre-coax CATV networks for broadband interactive services by Ton Koonen in June 2001 and Ethernet to the home by Reinaart Bryssinck, Martien Rjssemus and John van der Waal in March 2004 typify the variety of solutions to this issue. Unavoidably the problem of legacy systems and networks has meant that the introduction of digital transmission techniques has had to be gradual and digital and analogue signals have had to co-exist on networks for some appreciable time. This has spawned a completely new set of problems associated with the interaction of these signals in both the downstream and return path of the networks. Articles such as Interaction between analogue and digital distortions in a cable mixed signal multiplex by M Ryba and J B Waltrich in June 2001, Characterisation of common path distortions by Dr Bharat Patel in June 1998 and Two-way communications over HFC – the imperative for new passives by Hemant Mardia in September 1996 exemplify the problems and also the early awareness of these issues.
Extending the bandwidth of networks To cater for the proliferation of services that can be delivered to the customers, systems and networks need to be as bandwidth-efficient as possible. Techniques available to ensure that all the available bandwidth is efficiently made use of include making use of ‘free spectrum’ such as described in the article Extending your digital bandwidth by Victor Francis in June 2004 as well as deploying efficient signal modulation systems as described in their already referred to article Cable 256QAM trial: Increasing the throughput by C J Appleton, D Gray and D Greatbach in June 2002. Fibre optic transmission – DWDM Physical means of increasing the capacity of networks have relied mostly on the development and deployment of advanced 1550nm fibre optic products such as optical amplifiers and Dense Wave Division Multiplexing (DWDM) as exemplified in the following articles:
Standards Unlike the situation that has previously existed with analogue transmission and broadcast standards throughout the world, digital transmission has been accompanied by an unprecedented amount of international standardisation work to ensure interoperability, reliability and verifiable Quality of Service (QoS) goals. Articles such as EuroDOCSIS 1.1. The Path to IPCablecom by James Shea in March 2002, Performance analysis of QoS over CATV networks by Dr V Rangel and Dr R M Edwards, An advanced CMTS receiver architecture for DOCSIS 1.x/2.0 cable access networks by F Buda, E Lemois and H Sari in March 2003 and DOCSIS reliability = increased revenue by Brady Volpe in September 2004 are typical examples of the profusion of articles on the subject of standards, reliability and QoS.
their needs, was required and Crosstalk was launched in February 1998, under the editorship of Graeme Young. We ran to 14 successful issues before, sadly, over the millennium with the industry consolidating, the number of technician members gradually reduced. Subsequently, therefore, a decision was made in September 2003 to amalgamate the two publications, retaining the excellent ‘fundamentals’ element of Crosstalk within the CTE pages as well as providing more coverage of SCTE news. Most importantly, we retained Graeme’s invaluable contributions as CTE’s Deputy Editor. It was hoped that this new format and content mix would satisfy the need of our membership without diluting the appeal of CTE to a more general readership. The feedback was very positive. The future It is difficult to improve on the sentiments of the closing paragraphs of the 1995 brochure: ”CTE enjoys a reputation as the technical Journal ‘par excellence’. It continues to publish technical papers of the highest quality and will remain the vehicle through which the Society will inform and serve its members. If, in the process, it attracts a far wider readership, that is a very welcome bonus.” Dan Smart 2005
Crosstalk The Society has always stood for improvement of the status of the engineering profession. The advent of large scale cable networks, both during their construction and then their operation, required that large numbers of new recruits to the Industry had to be trained by the cable operators. The Society produced and very
n Advanced 1550nm technology for HFC broadcast video by Ravi Sastry in June 2003
n Gigabit Ethernet-over-DWDM Transport
n Architectures for On-Demand Services by Fernando Armendola and Patrick Harshman in September 2002
n Interacting at 1550 by John Allsopp in September 1998
Crosstalk
n Long distance 1550nm fibre optic CATV supertrunking – Dr Chris Bonang in December 1996.
successfully sold large numbers of training courses with the result that many new Technician Members swelled our ranks. It was felt that a publication, more in tune with
48
75 Plus - A history of the SCTE, The Society for Broadband Professionals
75 Plus - A history of the SCTE, The Society for Broadband Professionals
49
Made with FlippingBook - Online magazine maker