21922 - SCTE - 75th Historical Book v6

and any new standards work emanating from either IEC or CENELEC, whether at a draft committee stage or a final version for publication, are circulated to ‘interested’ parties such as Virgin Media, Ofcom, the CAI, BSkyB and suppliers for comment. Responses are correlated and passed through BSi as a National Committee recommendation to IEC or CENELEC. With the disappearance of the CCA, the Society is now the only body representing the Industry in these two forums. The other major standards development programmes in the last two decade have been DVB and EuroDocsis, the two becoming intertwined in 1999 with much irritation and frustration to both sides (some might say open warfare!). DVB was set up in 1993 as a fast track system to produce common European Digital Video Broadcasting standards. With buy-in from all major manufacturers and MSOs it became the major influence in defining the modern digital world although not a standards body in itself. It produced specifications which either ETSI or CENELEC would then rubber stamp and issue as standards, the first ones appearing as early as 1995. DVB addressed the issues specific to Cable and produced a specification for return path traffic related to interactive TV applications (DVB-RC). With the explosion of the Internet and the need for bi-directional data transmission on cable networks, DVB decided to expand the specification to cover cable modems. In the USA work had also been continuing under CableLabs (actually then the MCNS group) to try to provide a common standard to replace the myriad of different modems already being deployed. Early deployment in the UK by ntl used MCNS modems for economic reasons (the size of the US market place drove down

production prices) and since DVC-RC development was still in its infancy and product not readily available. In the DVB forum, however, ntl strongly supported DVB- RC both for STB return path data and for cable modems with stated intent of withdrawing the MCNS modems when DVB-RC ones became freely available. Cable & Wireless took the same view on choosing to deploy the most widely available and cheapest MCNS (now called DOCSIS) modem solution but saw no reason why they should not exist in parallel to DVB STBs but with a common return path specification. Such a view was an anathema to the committed DVB technical group and for my sins, as the representative of Cable & Wireless at the DVB board meetings, I had the unpleasant task of informing them that we would be deploying DOCSIS solutions for the long term on our networks. DVB decided that they would not consider any change to DVB-RC to provide compatibility or inter- working with Docsis and with the backing of ECCA would proceed with the ‘Euromodem’. An alternative strategy was required and my position in the popularity stakes was further diminished when, together with Richard Catchpole of Nortel, (who did most of the documentation work) and Andy Mullens of Motorola we fought to get a European version of Docsis (EuroDocsis), accepted as an appendix to the ITU-T J112 specification and then to convince ETSI through the Joint Technical Committee for Broadcast to proceed with developing EuroDocsis as part of the cable modem standard alongside the DVB-RC revisions. We had little support from the DTI or Oftel in this fight but by July 1999 we had succeeded in getting agreement for parallel development of the two standards. It was at this time that I left Cable & Wireless and the work was taken over by

David Woollard who was successful in pushing through the work to completion, together with involvement with the TOCOF (Telecom Over Cable Operator Forum) working group which later developed into TcomLabs. It is interesting that following the absorption of Cable & Wireless into ntl, a strategic technical review decision was made to commit to EuroDocsis and withdraw from the DVB-RC solution. Even DVB became more placatory when it was obvious that EuroDocsis would succeed and liaison now exists between CableLabs and DVB on current and future work. Docsis 1.0 was released in March 1997 and included functional elements from preceding proprietary cable modems. Version 1.1, released in April 1999 standardized quality of service (QoS) mechanisms. Docsis 2.0 was released in December 2001 and provided for enhanced upstream data rates in response to increased demand for symmetric services such as IP telephony. Docsis 3.0 was released in August 2006 and significantly increased data rates (both upstream and downstream) as well as introducing support for Internet Protocol version 6 (IPv6). Docsis 3.1 was released in October 2013, and has been updated several times. The specification supports up to 10Gbit/s downstream and 1Gbit/s upstream using 4096QAM. It removed 6MHz and 8MHz wide channel spacing and instead uses narrower (25kHz or 50kHz wide) orthogonal frequency-division multiplexing (OFDM) subcarriers; these can be bonded inside a block spectrum that could end up being about 200MHz wide. The technology also includes power-management features that enable reduction of energy usage.

Docsis 4.0, not significantly deployed as I write, enables the full use of cable spectrum (0MHz to ~1.8GHz) at the same time in both upstream and downstream directions. This technology enables multi-gigabit symmetrical services while retaining backward compatibility with Docsis 3.1.

62

75 Plus - A history of the SCTE, The Society for Broadband Professionals

75 Plus - A history of the SCTE, The Society for Broadband Professionals

63

Made with FlippingBook - Online magazine maker