SCALESE SCALLOP STEP 1 Wriggle cut the outer scribed guideline. To wriggle cut, rotate wrist quickly from left to right, and back again while the graver moves forward. The flat graver should “walk” down the line. Finish step 1 by wriggle cutting the inner scribed line. USE GRAVER 37 FLAT For a wider wriggle cut, 38 or 39 flat can be used.
STEP 2
GRAVER 37 FLAT
For a wider wriggle cut, 38 or 39 flat can be used.
USE
Starting from the inside wriggle cut guideline, wriggle cut a semi-circle line with the apex of the semi-circle touching the outside wriggle cut guideline. Wriggle cut, or “walk” the graver in semi-circle shape. Stop cut at end of semi-circle. Repeat.
STEP 3
GRAVER 42 FLAT
USE
On the centerline of the border, start a thin line, then roll wrist away to add width to cut, then roll wrist back to centerline while lifting graver to finish cut.
STEP 4
GRAVER 42 FLAT
USE
The finishing cut starts at the same point as step 3, but this time turn the vise so the cut curves away from the centerline.
16
GRS.COM
2021 FALL
Made with FlippingBook - professional solution for displaying marketing and sales documents online