POSITIVE OUTCOMES ARE DOSE DEPENDENT
High Intensity laser light needs to reach the mitochondria of the damaged target tissue and the best results are achieved with a sufficient amount of light (number of photons = DOSE).
RECOMMENDATIONS FOR DOSAGES
“USING THE CORRECT DOSAGE CAN SIGNIFICANTLY REDUCE
Our recommendations used in our Protocols
PAIN AND EXPEDITE THE HEALING PROCESS (1).”
10 J/cm 2
Average Subacute indication
6 J/cm 2
Superficial tissue
15 J/cm 2
Deep tissue
Decrease dosage by 20%
Acute / Inflammation
Increase dosage by 20%
Chronic problem
Treatment area can be calculated in number of hand palms or CD size (around 100cm 2 )
CALCULATE THE DOSE NEEDED
DOSE (JOULES) = RECOMMENDED DOSAGE (J/CM²) X TREATMENT AREA (CM²)
Example : Indication Deep and Chronic => 15 J/cm² + 20% = 18 J/cm² Treatment area => equivalent 2 palms : 200cm² Total DOSE needed = 18 x 200 = 3600 Joules
TREATMENT TIME (SECONDS) = TOTAL DOSE NEEDED (JOULES) / POWER APPLIED (WATTS)
The delivery of this DOSE will depend on POWER and TIME. The higher power means shorter the treatment time.
Example : 3600 Joules to be delivered
at 1 Watt => 3600 seconds (1 hour) at 10 Watts => 360 seconds (6 minutes) at 20 Watts => 180 seconds (3 minutes)
Preset protocols are set following these rules. In addition, the Perfect protocol© guide will help to configure the most customized treatment parameters possible for better outcomes.
CONCLUSION
Penetration
Therapeutic Penetration
Off contact 810nm
On contact 810nm + 15% more therapeutic energy
On contact 980nm Deeper wavelength penetration plus larger therapeutic area
The bright area shows the light penetration of 1W delivered in 1 second. The therapeutic effect on cells exceeds this area (shown in red).
Made with FlippingBook - PDF hosting