Cabinet Hardware e-Catalogue - Lincoln Sentry

INDEX

Drawer Systems LEGRABOX Accessories

Drawer Systems

TIP-ON with BLUMOTION

Side Stabiliser

• Additional stabilisation for extra wide pull-outs • Recommendation: Cabinet width 900 up to 1400 mm • Aluminium shaft suitable for KB 1400 mm, for cutting to size • Suitable for use in combination with BLUMOTION and SERVO-DRIVE • No additional space requirement at the bottom

NL

Nominal length

TIP-ON BLUMOTION Set

Side Stabiliser

6.1

Recommended weight ranges* for an optimum opening and closing function < 10 kg 20 kg 30 kg 40 kg 50 kg 60 kg 70 kg

Shaft cutting LW - 275mm Tooth strip cutting NL + 10mm LW = Inner cabinet width NL = Nominal length

Nominal Length

Blum No

Code

Nominal Length Unit

Blum No

Code

270 - 400

ZS7.M400LU

1-273-040

270

S0

T60L7040

1-271-041

≤ 10

450 - 600

ZS7.M650LU

1-273-065

S1

T60L7140

1-271-041

> 10–20

350 - 600 Composedof: 6a:1xTIP-ONBLUMOTION unit left/right 6b:1xTIP-ONBLUMOTION latch left/right 6e:2xT IP-ONBLUMOTION synchronisationadapter InternalcabinetwidthLW≥294mm ¹Recommendedweightranges(totalweightof thepull-out) foranoptimumopeningandclosing function ²Canonlybecombinedwitha40kgcabinetpro L1 T60L7340 L3 T60L7540 L5 T60L7570

≤ 20

1-271-341

Base Stabiliser

1-271-541

15 – 40

35 – 70

1-271-571

Base Stabiliser

* Total weight of the pull-out

For stabilising wide drawer bases Reinforces the connection between the base and the front Recommendation: from cabinet width of 900 mm, 1 piece

Blum No

Code

TIP-ON BLUMOTION Sink Sets

6.2

Z961.10E1

1-238-614

Recommended weight ranges* for an optimum opening and closing function < 10 kg 20 kg 30 kg 40 kg

Space Requirement in Cabinet

Front Drilling Distances

Nominal Length Unit

Blum No

Code

350 - 550

L1

T60L7340

1-271-341S

≤ 20

Composedof: 6c1xTIP-ONBLUMOTION unit left/right 6d1xTIP-ONBLUMOTION latch left/right 6e2xTIP-ONBLUMOTION synchronisationadapter

X = 14 mm + front overlay

L3

T60L7540

1-271-541S

15 – 40





InternalcabinetwidthLW≥314mm ¹Recommendedweightranges(totalweightof thepull-out) foranoptimumopeningandclosing function ²Canonlybecombinedwitha40kgcabinetprofile

* Total weight of the pull-out

Torx Screwdriver

4

TIP-ON BLUMOTION round synchronisation linkage for cutting to size Possible for cabinet widths ≥ 400 mm Suitable for cabinet widths of up to 1400 mm Round for cutting to size Maximum drawer width 1400 cw Cutting: LW - 247mm LW = Internal cabinet width

Torx Screwdriver

Blum No

Code

Description

Blum No

Code

Torx size 20 (T20) Required for adjusting LEGRABOX drawers

Blade length 35mm

SR - DREHTX20 35

1-344-094

T60.1125W

1-271-125

Blade length 100mm

SR - DREHTX20 100

1-344-092

Accessories

Front gap template for TIP-ON BLUMOTION LEGRABOX / MOVENTO

Setting the front gap to 2.5 mm

Blum No 65.5631

Code

1-271-130

For planning, assembly, installation and adjustment information please refer to Blum’s trade catalogue, DYNALOG planning and ordering software, Blum Online Product Configurator and/or the Blum EASY ASSEMBLY App.

CONTENTS

B.68

B.69

DRAWER SYSTEMS

DRAWER SYSTEMS

LINCOLN SENTRY

Dimension data and specifications may change without notification.

Made with FlippingBook Learn more on our blog