INDEX
Drawer Systems
Drawer Systems
Drawer Height Planning Information: Height K
Drawer Height Planning Information: Height C
Space Requirements in Cabinet
Dimensions for Screw-on Front
Space Requirements in Cabinet
Dimensions for Screw-on Front
Front Drilling Distances for EXPANDO
Back Installation Dimensions
FA Front overlay
*+1 mm if cabinet profile is installed before the cabinet is assembled
*+1 mm if cabinet profile is installed before the cabinet is assembled
FA
Front overlay
*
+1 mm if cabinet profile is installed before the cabinet is assembled
*
+1 mm if cabinet profile is installed before the cabinet is assembled
Cutting Dimensions for 16 mm Chipboard
Front Drilling Distances for EXPANDO
Back Installation Dimensions
Back 148 mm
Base Chipboard back NL - 10 mm
LW - 38 mm
KB
Cabinet width
Notch dimensions
LW - 35 mm
LW
Inner cabinet width
*
+1 mm if cabinet profile is installed before the cabinet is assembled
NL
Nominal length
Drilling Distances Base
Cutting – design element
Cutting Dimensions for 16 mm Chipboard
Design element X (mm) Y (mm) Low LW – 80 70 High LW – 80 138 Side NL – 112 138 LW Internal cabinet width NL Nominal length
Back 101 mm
Base Chipboard back NL - 10 mm
LW - 38 mm
KB
Cabinet width
The given dimensions in combination with LEGRABOX/TANDEMBOX do not require “impact testing for vertically installed glass parts” as per the DIN EN 14749 norm Nov.2005. For norm compliance no safety glass is required. The edge is a polished flat-ended edge with a 1 mm ±0.5 mm bevel.
Notch dimensions
LW - 35 mm
LW
Inner cabinet width
NL
Nominal length
* + 1 mm if runners are installed before cabinet is assembled
** Incl. 2 mm tilt adjustment
Drilling Distances Base
Cutting – Front Piece With Groove
Cutting – Front Piece Without Groove
Cutting – Gallery
* + 1 mm if runners are installed before cabinet is assembled ** Incl. 2 mm tilt adjustment
CONTENTS
B.72
B.73
DRAWER SYSTEMS
DRAWER SYSTEMS
LINCOLN SENTRY
Dimension data and specifications may change without notification.
Made with FlippingBook Learn more on our blog