INDEX
Drawer Systems SPACE TOWER: Planning
Drawer Systems TIP-ON BLUMOTION for TANDEMBOX: Components
Recommendation
TIP-ON unit and TIP-ON BLUMOTION and latch set
Positioning in the cabinet
Drilling distances front
Drilling distances front
Recommended weight ranges* for an optimum opening and closing function Nominal Length Unit
Blum No Code >10kg 20 kg 30 kg 40 kg 50 kg 60 kg 65 kg
S0 S1
T60B3030 T60B3130
1-231-303 1-231-313 1-231-333 1-231-353 1-231-356
≤ 10
In high cabinets, it is practical to have a shelf at the highest level rather than an inner drawer
270
>10-20
L1** T60B3330
≤ 20
350 - 550
L3 L5
T60B3530 T60B3560
15 - 40
Qty 28
35 - 65
* The weight specified here refers to the pull-out with front, with a load inside. ** L1 cannot be used with a 65kg cabinet profile and only to be used with a 30kg cabinet profile. TIP-ON BLUMOTION is only compatible with a TANDEMBOX optimised drawer side profile (code starting with 378).
1684
TIP-ON BLUMOTION round synchronisation linkage for cutting to size Possible for cabinet widths ≥ 400 mm. Suitable for cabinet widths of up to 1400 mm. Round for cutting to size. Maximum drawer width 1400 cw. Cutting: LW - 240mm. LW = Internal cabinet width. Blum No Code T60.1125W 1-271-125 Qty 2840
The inner drawer allows access from the side. If the inner drawer is implemented with a higher back, stored goods are prevented from falling down the back
1428
TIP-ON BLUMOTION synchronisation adapter Symmetrical, in combination with synchronisation linkage, two items required per synchronisation linkage, for internal cabinet width ≥ 294 mm Sold as EA
1108
Blum No T60.000D
Code
Qty 2880
The option to position the pull-outs at different heights within the cabinet guarantees that no items will be too tall to be stored inside
1-271-120
Support for Syncronisation Linkage Required for cabinet widths ≥ 750 mm Prevents the synchronisation linkage from sagging Sold as EA
Blum No T60B000H
Code
Qty 28250
756
1-271-127
The CLIP top 155° hinge without front protrusion allows the cabinet width to be put to optimal use
Gap checking/adjustment template For TIP-ON BLUMOTION TANDEMBOX Setting the front gap to 2.5mm Sold as EA
Blum No
Code
Qty 280
436
65.5627
1-231-130
Base Support Bracket Required for cabinet widths ≥ 750 mm For supporting the pull-out base Sold as EA
If the hinge is mounted above the pull-out, the lowest pull-out can be inserted right at the bottom. turning even those last few centimetres into usable storage space
Blum No Z96.2011
Code
Qty 28250
1-238-618
52
Front Stabiliser For stabilisation of high and wide front, two items required per front Sold as EA Material Colour Blum No
Code
Qty 28250
Nylon
RAL 7037 Light Grey
Z96.10E1
1-238-614
CONTENTS
B.150
B.151
DRAWER SYSTEMS
DRAWER SYSTEMS
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog