INDEX
Drawer Systems SERVO-DRIVE for LEGRABOX/TANDEMBOX
Drawer Systems SERVO-DRIVE for LEGRABOX/TANDEMBOX
(Top and Bottom)
Planning - horizontal cross member
Planning - vertical cross member
Lower cabling
Back cabling
Front assembly - position of Blum distance bumper Drawer with overlay front
Cabinet dimensions
KB LW
Cabinet width
Inner cabinet width Internal cabinet depth
LT
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay FH Front height
Alternative drilling pattern for PRO-CENTER and MINIPRESS
Page Instructions
Drilling distance base/cross bar
Position - drive unit
Bracket profile cutting dimensions
Cabinet width KB 275 - 420 mm NL Nominal length X Drilling position Y
Cabinet width KB 320 - 420 mm Steel back height N
Min. space requirement
Cabinet width KB starting at 420mm
Drilling position and space requirement for all applications
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
Back
X (mm) NL + 2
Y(mm)
Steel back LT = NL +17 Chipboard back NL + 19 LT = NL +34
Drilling position and min. space requirement
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing).
Back
X (mm) NL - 1
Y(mm)
Steel back LT = NL +14 Chipboard back NL + 16 LT = NL +31
Back height N
LH PL
Internal cabinet height Bracket profile length
All back heights except height N LH Internal cabinet height PL Bracket profile length KB Cabinet width
Cabinet width KB Steel back Chipboard back Back height N
< 320 mm
> 320 mm
Y (mm) X (mm) Y (mm) X (mm)
27.5 35.0
48.5 55.5
27.5 27.5
48.5 48.5
CONTENTS
B.178
B.179
DRAWER SYSTEMS
DRAWER SYSTEMS
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog