Cabinet Hardware e-Catalogue - Lincoln Sentry

INDEX

Drawer Systems SERVO-DRIVE for LEGRABOX/TANDEMBOX

Drawer Systems SERVO-DRIVE for LEGRABOX/TANDEMBOX (Sink Drawer)

Planning

Planning

Cabinet

Cabinet bottom - attachment bracket 1 tier

Cabinet

Cross member - attachment bracket 1 tier

LEGRABOX | TANDEMBOX Chipboard back X Drilling position *

LEGRABOX | TANDEMBOX Steel back X Drilling position *

W

Distance between the front edge of the drawer base NL drawer side exterior - NL drawer side interior LEGRABOX: min 150 mm TANDEMBOX: min 100mm

LEGRABOX | TANDEMBOX Centre piece X Drilling position *

Measured from cabinet front edge

Internal cabinet width LW (mm) ≥ 387 A (mm) Measured from cabinet front edge

Measured from cabinet front edge

KB LW

Cabinet width

KB LW

Cabinet width

Box Systems Back

Back height

Box Systems Back

Back height N|M|K|C|F

A (mm)

Inner cabinet width Internal cabinet depth

Inner cabinet width Internal cabinet depth N

LEGRABOX Ce tre piece

45 28 35

LEGRABOX Chipboard back N|M|K|C|F

45

LT

LT

TANDEMBOX Centre piece

M|K|B|C|D

N 28 M|K|B|C|D 35

TANDEMBOX Chipboard back

Distance between the bottom edge of the attachment bracket and the bottom edge of the drive unit

A

Distance between the bottom edge of the attachment bracket and the bottom edge of the drive unit

A

Cross member - attachment bracket 1 tier

-

Not possible

Internal cabinet width LW (mm) ≥ 387 Nominal length exterior NL (mm) 400

Box Systems Back

Back height

450-650

X (mm)

Z (mm) LW / 2

X (mm)

Z (mm) LW / 2

Cabinet bottom - attachment bracket 1 tier

LEGRABOX Centre piece N|M|K|C|F

157

177

TANDEMBOX Centre piece N|M|K|B|C|D W + 27

LW / 2 W + 27 LW / 2

Back

X (mm)

Y (mm)

Z (mm)

X

Drilling position

Chipboard back

NL + 19 NL + 33 LW / 2

Z

Dimension of engagement

Cabinet width KB starting at 900 mm NL Nominal length X Drilling position Y Min. space requirement

Steel back

NL + 2

NL + 16 LW / 2

W

Distance between the front edge of the drawer base and the centre piece

LW Internal cabinet width NL Nominal length X Drilling position Y Min. space requirement Z

BT

Drilling path

Cabinet bottom - drilling pattern

Front assembly - position of Blum distance bumper

Lower cabling

Dimension of engagement

Space requirement and safety distance - transformer unit housing

Attention Maintaining a 30 mm safety distance from the bottom edge (base fixing) and/ or front edge (panel fixing) and side edges of the transformer unit housing to the neighbouring elements

Air must be able to circulate, otherwise the Blum transformer could overheat

BT

Drilling path

The Blum distance bumper creates and maintains the required trigger path of 2mm When using a 70kg LEGRABOX or 65kg TANDEMBOX runner, attach four Blum distance bumpers For optimal trigger function for front height FH > 300mm, use front stabilisation FA Front Overlay FH Front Height

Base fixing

Panel fixing

BT Drilling path Alternative drilling pattern for PRO-CENTER and MINIPRESS

CONTENTS

B.188

B.189

DRAWER SYSTEMS

DRAWER SYSTEMS

Dimension data and specifications may change without notification.

LINCOLN SENTRY

Made with FlippingBook Learn more on our blog