INDEX
Hinge Systems BLUMOTION for Doors 970 - Handle Side
Hinge Systems BLUMOTION 973A
Assembly Position
Hinge with straight hinge arm
Hinge with cranked hinge arm
CLIP top •
CLIP top •
Up to carcass width 600mm for all CLIP Top hinges
Because BLUMOTION for doors is customised for BLUM hinges, the only way to get that perfect movement that is both quiet and easy is to combine the two. Some general notes regarding assembly position: Distance from hinge: max. 600mm for glass door / Mini hinges: 1/2 door width Normally, one BLUMOTION per door is sufficient. However, some circumstances may require the use of a second BLUMOTION, e.g. higher door weight, unstable doors (wooden frames, fixed fronts, large aluminium frame doors, etc.).
120° hinge 107° hinge
107° hinge
• • •
• •
Profile/thick door hinge
Profile/thick door hinge
100° hinge
100° hinge
Qty 50/250
Qty 500
Hinge with straight hinge arm Blum No
Hinge with cranked hinge arm Blum No
Code
Code
optimal position
973A0500.01
1-310-120
973A0600
1-310-121
170° - hinge
Hinge with double cranked hinge arm
CLIP top •
CLIP top •
170° hinge – inline 170° hinge – cranked
107° hinge
•
• •
Profile/thick door hinge
100° hinge
Qty 25/125
optional position
Hinge with double crank hinge arm Blum No
Qty 50/250
170° - hinge
Blum No 973A6000
Code
Code
1-310-125
973A0700
1-310-123
BLUMOTION - 971A
Assembly for drilling
Cruciform Plate (Screw On)
37/32
•
Fixing with chipboard screws Ø 3.5 or Ø 4mm Material: zinc, nickel plated
•
Qty 25/125
Cruciform Plate (Screw On) Blum No
Code
971A0500
1-310-130
Cruciform Plate (EXPANDO)
37/32
•
Fixing with pre-mounted special screws with split dowels (EXPANDO) Material: zinc, nickel plated
•
Assembly with adapter plate
Qty 25/125
Cruciform Plate (EXPANDO) Blum No
Code
971A05E0
1-310-132
Construction height 25mm
Assembly position & number required
For optimal BLUMOTION effect, BLUMOTION 971A should be attached to the centre between the hinges. For high and heavy doors, we recommend using an additional BLUMOTION 971A between an additional hinge pair. Any depth adjustment made to the hinge arm should be mirrored on the 971A, this is easily achieved via a spiral screw depth adjustment feature (+3 to -7mm).
CONTENTS
C.56
C.57
HINGE SYSTEMS
HINGE SYSTEMS
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog