INDEX
Lift & Flap Systems
Lift & Flap Systems
STANDARD / SERVO-DRIVE AVENTOS HS - Up & Over Lift System
PLANNING / ASSEMBLY, REMOVAL & ADJUSTMENT AVENTOS HS - Up & Over Lift System
Planning Drilling position
Planning Blum distance bumper (SERVO-DRIVE application only)
Space requirement
Front setting
SERVO-DRIVE switch
Lift mechanism
* From cabinet front edge for fronts that protrude below
135
min 276
38 76
22
Insert Blum distance bumper (do not glue)
Recommendation for aluminium frames: Consider drilling for the Blum distance bumper in the cabinet side. A trial application must be carried out when fixing to the front
Assembly
* Drilling depth 5 mm ** Alternative drilling SOB
Dimensions depend on tilt adjustment
Lever arm
Top panel thickness 5 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, left only
Front assembly – wooden fronts and wide alu frames
Assembly
Lever arm
WARNING
Use 4 chipboard screws for wooden fronts. Use 4 counter sunk self tapping screws for wide alu frames
Lever arm could spring up and cause injury.
Gap F (mm)
X max. (mm)
Y max. (mm)
Cornice/crown moulding clearance
Connecting piece
3.0 2.0 1.5
35 31 28
101 101 101
Leverarmcouldspringupandcause injury
Remove the leverarmrather thanpushing itdown
Cross stabiliser
CONTENTS
D.18
D.19
LIFT-SYSTEMS & ASSEMBLY DEVICES
LIFT-SYSTEMS & ASSEMBLY DEVICES
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog