INDEX
Lift & Flap Systems STANDARD / SERVO-DRIVE AVENTOS HK - Stay Lift System
Lift & Flap Systems STANDARD / SERVO-DRIVE AVENTOS HK - Stay Lift System
Planning Drilling position
Planning Blum distance bumper (SERVO-DRIVE application only)
Space requirement
In general, Blum recommends installing 4 Blum distance bumpers near to the switch. For certain applications (high fronts, low weight), 2 Blum distance bumpers may sometimes be sufficient. A trial application is recommended.
4&370%3*7&
* Drilling depth 5 mm ** Alternative drilling SOB
LH Internal cabinet height * Min. 261 mm with visible wall hanging bracket
Insert Blum distance bumper (do not glue) Do not put a bumper on the front upper edge
Recommendation for aluminium frames: Consider drilling for the Blum distance bumper in the cabinet side. A trial application must be carried out when fixing to the front
Top panel thickness 3 x chipboard screws Ø 4 x 35 mm Drilling for SERVO-DRIVE distribution cable, left only
SERVO-DRIVE switch
Front assembly – wooden fronts and wide alu frames
Use 4 chipboard screws for wooden fronts. Use 4 counter sunk self tapping screws for wide alu frames
D (mm) 16 X (mm) 70
19 59
22 49
26 35
28
Cornice/crown moulding clearance
Minimum gap
26 Opening angle stop Space requirement (mm) Without Y = FH x 0.29 - 15 + D 100° Y = FH x 0.17 - 15 + D 75° A = FH x 0.26 + 15 - D
MF
Minimum gap 2 mm
CONTENTS
D.24
D.25
LIFT-SYSTEMS & ASSEMBLY DEVICES
LIFT-SYSTEMS & ASSEMBLY DEVICES
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog