INDEX
Lift & Flap Systems
Lift & Flap Systems
Planning Information: TIP-ON for Doors
Assembly & Adjustment: TIP-ON for Doors
Short version for drilling
Short version adapter plate
Assembly position
Optimal opening support is achieved if the TIP-ON unit is attached exactly where the handle would be. The fixing position can deviate ± 300 mm in height and up to a quarter of the cabinet width in terms of width.
20 17
20 17
* min. 2.6 mm with glue-on catch plate * min. 3.1 mm with screw-on catch plate
Short/long version for drilling
Long version for drilling
Long version adapter plate
32
20
32
20
Assembly
Glue-on catch plate
Screw-on catch plate
* min. 2.6 mm with glue-on catch plate * min. 3.1 mm with screw-on catch plate
Inline adapter plates
Screw-on/Glue-on catch plate for drilling
Screw-on/Glue-on catch plate with adapter plate
Assembly
Glue-on catch plate
Screw-on catch plate
* For screw-on catch plates we recommend offsetting the positioning of TIP-ON by 3mm. For hard surfaces Ø 2.5 mm pre-drilling and countersinking if required.
The surface of the front must be clean, oil-free and dry
* For screw-on catch plates we recommend offsetting the positioning of TIP-ON by 3mm. For hard surfaces Ø 2.5 mm pre-drilling and countersinking if required.
The surface of the front must be clean, oil-free and dry
ADJUSTMENT
TIP-ON adjustment
FA
front overlay
FA
front overlay
Note Blum recommend the use of the screw-on catch plate for optimal performance.
CONTENTS
D.28
D.29
LIFT-SYSTEMS & ASSEMBLY DEVICES
LIFT-SYSTEMS & ASSEMBLY DEVICES
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog