INDEX
Lift & Flap Systems
Lift & Flap Systems Planning Information: TIP-ON
Planning Information - AVENTOS HK-XS
Cabinet positions for lift mechanism
Space requirement
Fixing position TIP-ON short version
Horizontal adapter plate short
H = 137 + D + K + SOB D
LH
Internal cabinet height
Mounting plate spacing
K
Hinge crank Horizontal hinge arm 0 mm Cranked hinge arm 9.5 mm Double cranked hinge arm 18 mm
SOB Top panel thickness
27
min 125* (min 100*)
27
min 125* (min 100*)
Installation dimensions TIP-ON short version
Horizontal adapter plate short
Front assembly
Space requirement
Y = (FH – a) x 0.3
Wooden fronts and wide aluminium frames 1)
Ø 3.5 x 15 mm FAo Upper front overlay SFA Side front overlay
FD (mm)
16 19 22 24
a (mm)
45 34 23 15
20 17
15.5
FD FH
Front thickness
Number of hinges 3 hinges starting at cabinet width 900 mm and/or power factor 1800 4 hinges starting at cabinet width 1200 mm and/or power factor 2700
Front height
Factory setting = 2 mm
Screw-on catch plate planning
For drilling
Horizontal adapter plate
Use 2 chipboard screws for wooden fronts. Use 2 countersunk self-tapping screws for wide aluminium frames. Special drilling positions for a minimum internal depth of 100 mm To ensure optimal motion, use standard drilling positions for a minimum internal depth of 125 mm
1)
Cornice and crown moulding clearance
( )
FD (mm)
16 19 22 24
'"V
x (mm)
45 34 23 15
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory setting for CLIP top BLUMOTION 110°
FD
Front thickness
FAu Lower front overlay * We recommend offsetting the positioning of TIP-ON by 3 mm for the screw-on catch plate. Note: the glue-on catch plate should not be used in combination with TIP-ON for AVENTOS HK-XS.
TB
Drilling distance
Front thickness FD 16 18 19 20 21 22 23 24 25 26 28 30 3 0.5 0.8 1.0 1.2 1.5 1.8 2.2 2.7 3.5 4.3 4 0.5 0.8 1.0 1.2 1.4 1.7 2.0 2.5 3.1 3.8 5 0.5 0.8 0.9 1.2 1.4 1.7 2.0 2.4 2.9 3.4 6 0.5 0.8 0.9 1.2 1.3 1.6 1.9 2.3 2.7 3.2 7 0.5 0.8 0.9 1.1 1.3 1.6 1.9 2.2 2.6 3.0 Additional for + 2 mm side adjustment +0.2 +0.4 +0.4 +0.5 +0.5 +0.5 +0.5 +0.5 +0.5 +0.5
Minimum gap
MFu Minimum gap at the bottom (1.5 mm)
MFo Minimum gap at the top depending on hinge used
TB
CLIP top BLUMOTION 110°
CLIP top BLUMOTION 110°
TB
Drilling distance
F
Gap
Front overlay FA 5 6 7 8 9 10 11 12 13 14 15 16 17 18
FA
Front overlay
TB
Drilling distance
0
3 4 5 6 7
3
3 4 5 6 7
TB
6
3 4 5 6 7
9 3 4 5 6 7 Mounting plate
CONTENTS
D.40
D.41
LIFT-SYSTEMS & ASSEMBLY DEVICES
LIFT-SYSTEMS & ASSEMBLY DEVICES
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog