INDEX
Assembly Devices Hinge Assembly Devices
Assembly Devices Hinge Assembly Devices
TEMPLATE FOR HINGE, PLATES AND AVENTOS
DRILLING TEMPLATE FOR BLUMOTION/TIP-ON
• Template for drilling the fixing positions for mounting plates (Ø 2.5 mm) • Template for pre-drilling the fixing positions for adapter plates (BLUMOTION/TIP-ON for doors) • Template for transferring door measurements to the cabinet • If mounting plate fixing positions are standard throughout, then it is possible to fix several templates to a wooden strip • Assembly on a marking line
• Template for drilling insert BLUMOTION for doors, as well as TIP-ON for doors and AVENTOS • Assembly on a marking line
Assembly Possibilities
TIP-ON assembly
BLUMOTION assembly
Position template on marking line Distance from cabinet inner side to centre drilling 7.5 mm Perform drilling for TIP-ON (Ø 10 mm)
Position template on marking line Distance from cabinet inner side to centre drilling 7.5 mm Perform drilling for BLUMOTION (Ø 10 mm)
AVENTOS HF|AVENTOS HK-XS
CLIP top BLUMOTION|CLIP top|MODUL
AVENTOS HK|AVENTOS HK- S|AVENTOS HK-XS|CLIP top
Mark hinge arm centre or hinge arm outside edges in the cabinet or on the front (AVENTOS HF). Attach template and pre-drill fixing positions for inline (20mm) or cruciform mounting plates (37mm)
Mark hinge arm centre or hinge arm outside edges in the cabinet or on the front (AVENTOS HF). Attach template and pre-drill fixing positions for inline (20mm) or cruciform mounting plates (37mm)
Position template on marking line. Drill holes for BLUMOTION|TIP-ON adaptor plate (20|37mm)
Description
Material
Blum No
Code
Drilling Template for BLUMOTION/TIP-ON
Nylon/Steel
65.5010
1-285-688
POSITIONING TEMPLATE FOR TIP-ON CATCH PLATE
Description
Material
Blum No
Code
• •
TIP-ON catch plate (glue-on or screw-on) Suitable for overlay and inset applications
Template for Hinge, Plates and AVENTOS
Steel
65.5300
1-335-505
• Measurements transferred by marking the position or by direct adhesion
DRILLING TEMPLATE FOR MOUNTING PLATES
• Template for drilling the fixing positions for cruciform mounting plates (Ø 5 mm) • Template for drilling the fixing positions for cruciform mounting plates (BLUMOTION/TIP-ON for doors) • The aligning function allows you to drill the 32 mm dimension exactly • Assembly on a marking line
Hinge system assembly
- Mark hinge arm centre or hinge arm outside edges on cabinet or on the front (AVENTOS HF) - Position template on marking line and drill first hole (Ø 5 mm) - Turn template around, insert positioning pin into drilling hole and drill second hole (Ø 5 mm)
Place template on the TIP-ON fitting and then insert the catch plate
Remove protective film
Gently close door
Press on catch plate
Position template on the TIP-ON fitting
Gently close door
Attach fitting at maked location
Description
Material
Blum No
Code
Description
Material
Blum No
Code
Drilling Template For Mounting Plates
Nylon/Steel
65.5070
1-335-506
Positioning Template for TIP-ON Catch Plate
Nylon/Steel
65.5210
1-285-689
CONTENTS
E.18
E.19
LIFT-SYSTEMS & ASSEMBLY DEVICES
LIFT-SYSTEMS & ASSEMBLY DEVICES
Dimension data and specifications may change without notification.
LINCOLN SENTRY
Made with FlippingBook Learn more on our blog