INDEX
Connectors, Fittings & Supports Button Fix
Connectors, Fittings & Supports Button Fix
Ø18
8
Button dimensions
BUTTON FIX TYPE 1 - WALL
BUTTON FIX TYPE 3 - FLUSH
Drawing: The Type 3 Button-Fix Flush is for applications where panel to panel contact is required and fits a simple oval rebate. It can be rebated into the edge of a panel of at least 28mm thick or the face of a panel of at least 18mm thick, and oriented for vertical or sideways assembly.
Drawing: The Type 1 Button-Fix Wall connects parallel panels and its strength has been verified by an independent test house. It can be configured in many different ways to best suit your application, either surface-mounted or rebated into the panel, and oriented for vertical or sideways assembly. Ø18 8
Button dimensions
22
8
Type 1 flush fix dimensions
Applications: • Panels • False walls
Applications: •
Wall panels
•
Display boards
Features: •
Vertical load = 25kg per fixing when installed with appropriate screws and substrate
Features: • Vertical load = 50kg per fixing when installed with appropriate screws and substrate
Type 1 fix dimensions
Description
Sold
Code
Flush Fixings & Countersunk Buttons
1 EA = Pack of 12 1 EA = Pack of 100
1-606-723 1-606-702
Flush Fixings Only
BUTTON FIX BUTTONS & SCREWS
52 36
8 5
Features: • Vertical load = 25kg per fixing when installed with appropriate screws and substrate
Description
Sold
Code
Wall Fixings & Countersunk Buttons 1 EA = Pack of 12
1-606-720 1-606-700
Wall Fixings Only
1 EA = Pack of 100
Description
Sold
Code
Bag of Countersunk Buttons Only – Green Bag of Euro Buttons Only – Orange
1 EA = Pack of 100 1 EA = Pack of 100
1-606-705 1-606-707 1-606-706 1-336-497 1-336-496 1-335-478
BUTTON FIX TYPE 2 - PANEL
Bag of Euro Buttons & L15.0 x Ø6.3mm Euro Screws 1 EA = Pack of 100
Drawing: The Type 2 Button-Fix Panel connects panels at 90° and engages with a straight push. It is ideal for panels with no clearance above or at the side and applications where the emphasis is on ease of access.
L7.5 x Ø6.3mm Euro Screw – 4 in 1 Head L10.5 x Ø6.3mm Euro Screw – 4 in 1 Head L15.0 x Ø6.3mm Euro Screw – Pozi Head
1 EA = Pack of 100 1 EA = Pack of 100 1 EA = Pack of 100
Ø18
8
Button dimensions
Applications: •
BUTTON FIX – ACCESSORIES
Access panels
•
Bulkheads
Features: • Vertical load = 20kg per fixing when installed with appropriate screws and substrate
50
18
LINCOLN SENTRY substrate are properly matched, and all other instructions complied with, tests showed that a vertical panel under no other loading than its own weight, fixed with four Type 2 Fixes, can weigh up to a maximum of 80kg (175lbs). Other configurations should always be properly tested by the user to their satisfaction. Product Button Marking Tool Sold individually. Warnings —Button-fix is intended for furniture construction and interior fittings and is not intended, nor should it be used, for any other purpose. —WARNING: Serious damage to property and severe bodily injury can result from (1) improper use, application or installation of the Button-fix or (2) use as part of improperly designed or constructed assemblies or materials. —Provided that the screws and
Safety Cord accessory In situations where safety is an issue, install two Safety Cords, one to each Fix in the top corners. An additional Button is used to capture the loop on the Safety Cord, installed adjacent to the fixing Button. To remove the panel completely, ease the loop on the Safety Cord off the Button. Please note that the Safety Cord accessory needs to be ordered separately from the Button-fixes.
Type 2 fix dimensions
25
3.3
—Avoid any contact with aggressive solvents and cleaning products. —It is not possible for Buttonfix to warn the consumer about every possible danger related to use of the Button-fix and the consumer must use his or her own good judgment when installing and using the Button-fix.
36
Description
Sold
Code
Product Suggested layout As an approximate guide, we suggest that Type 2 Fixes are spaced no greater than 600mm apart. This may vary, dependent upon the mass and stiffness of the panel. The Type 2 Fixes may be installed in a vertical or horizontal orientation, or a Code 1-606-710
Code
Product
Code
Panel Fixings & Countersunk Buttons 1 EA = Pack of 12
1-606-721 1-606-701
Fixing Marking Tool
1-606-711
Safety Cord Sold individually.
1-606-712
Panel Fixings Only
1 EA = Pack of 100
Sold individually.
CONTENTS
S.2
S.3
CONSUMABLES
CONSUMABLES
Dimension data and specifications may change without notification.
Made with FlippingBook Learn more on our blog