CROMOX GRADE 60 STAINLESS STEEL CHAIN SLINGS
Electrolytic Polished Finish Electrolytic polishing reduces the micro-roughness of the cabin, thereby reducing dirt and enabling the chain to be more easily cleaned and further resistant to corrosion.
CROMOX Chain Slings Grade 60 similar DIN 5688-1 Sand blasted
Weight
Chain W.L.L.
Dimensions mm
Type
min b 2
max
kg
t
d
t
b
1
*CK 4
0.35 0.60 0.90 1.20 1.50 2.40 3.85 5.00 7.00
4.0 5.0 6.0 7.0 8.0
12.0 15.0 18.0 21.0 24.0 30.0 39.0 48.0 54.0
5.0 6.5 7.8 9.1
13.7 18.5 22.2 25.9 29.6 37.0 48.1 59.2 64.8
0.350 0.540 0.800 1.100 1.400 2.200 3.800 5.700 7.300
CROMOX Grade 60 Stainless Steel Chain Slings Cromox Chain Slings and Accessories from Ketten Wälder provide safety for demanding lifting and heavy-duty transports with superior protection against corrosion in harsh environments and increased longevity. Cromox chain slings are designed in Germany for superior safety and durability.
KW-CK5 KW-CK6 KW-CK7 KW-CK8 KW-CK10 KW-CK13
10.4 13.0 16.9 20.8 24.3
10.0 13.0 16.0 18.0
Ring-and hook-ended Slings similar DIN 5688-1 Grade 60
KW-CK16 (G5)
Method of lifting Angle of inclination Nominal chain thickness acc. to DIN 5687 4
W.L.L. in (t)
*CK 18 (G5)
*On Request.
1-Leg
2-Leg, 3-Leg & 4-Leg
Direct
Tied
Direct
Tied
Direct
Tied
d
b2 b1
t
t
0.35 0.60 0.90 1.20 1.50 2.40 3.85 5.00 7.00
0.30 0.45 0.70 0.95 1.20 1.90 3.10 4.00 5.60
0.50 0.85 1.25 1.65 2.10 3.35 5.40 7.00 9.80
0.40 0.65 1.00 1.35 1.65 2.70 4.30 5.60 7.80
0.35 0.60 0.90 1.20 1.50 2.40 3.85 5.00 7.00
0.30 0.45 0.70 0.95 1.20 1.90 3.10 4.00
5 6 7 8
CROMOX Loop Chains CELK. Grade 60 bright polished
This section on Request.
10 13
16 (G5) 18 (G5)
5.60 The above-mentioned working load limits correspond approximately to the following load factors: 1.00 0.80 1.40 1.12 1.00 0.80 The strain must be reduced to 50 % of the W.L.L. for unbalanced lifting. Dependent on chain type and method of lifting. Note: Slings ending in Shackles may need to be de-rated to Grade 50 in some cases.
W.L.L. vertical t
W.L.L. t
W.L.L. t
Type
120°
90°
CELK 4 CELK 5 CELK 6 CELK 7 CELK 8 CELK 10 CELK 13
0.70 1.20 1.80 2.40 3.00 4.80 7.70
0.50 0.85 1.25 1.65 2.10 3.35 5.40 7.00
0.40 0.65 1.00 1.35 1.65 2.70 4.30
Loop chains vertically hanging
Basket chain with Master Link
L
Method of lifting Angle of inclination
W.L.L. in (t)
W.L.L. in (t)
Direct 0°°
Direct 0°
Tied 0°
Tied 0°
90°
120°
90°
120°
Nominal chain thickness acc. to DIN5687 4
CELK16 (G5)
10.00 5.60 L=Length 1000mm Circumference 2000mm Note: Custom sizes and finishes upon request
0.70 1.20
1.40 2.40
0.55 0.95
1.10 1.90
0.50 0.85
0.40 0.65
0.75 1.25
0.55 0.90
5
6 7 8
1.80 2.40 3.00 4.80
3.60 4.80 6.00 9.60
1.45 1.90 2.40 3.85
2.85 3.85 4.80 7.70
1.25 1.65 2.10 3.35 5.40 7.00 9.80
1.00 1.35 1.65 2.70 4.30 5.60 7.80
1.90 2.50 3.15 5.00
1.35 1.80 2.25 3.60
Working Load Limit dependent on chain temperature
10
-40°C to +250°C
over 250°C to 350°C*
over 350°C to 450°C
450°C
13
7.70
15.40 20.00 28.00
6.20 8.00
12.30 16.00 22.40
8.10
5.80 7.50
16 (G5) 18 (G5)
10.00 14.00
10.00 14.70
W.L.L.
100%
75%
50%
11.20
10.50
*1.4462 (AISI 318LN) max 350°C allowed
The above-mentioned working load limits correspond approximately to the following load factors: 2.00 2x2 1.60 3.20 1.40 1.12 2.10 In (presumably arising) bending stresses the working load must be reduced as follows: 1.60 2 x 1.60 1.10 0.80 1.70
1.50
1.20
The strain must be reduced to 50 % of the W.L.L. for unbalanced lifting. Dependent on chain type and method of lifting .
30 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577
CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 31
Made with FlippingBook - Online catalogs