Badlands Motorcycle Products Catalog

HARLEY MODULES

THE ILLUMINATOR™ “OEM” HARDWIRE AND PLUG-IN Don’t care about fancy turn signals or LEDs? If you are happy with stock turn signals and running incandescent bulbs , then our OEM version Illuminator™ is the module for you! Turns your stock turn signals into running lights, brake lights and

•Optimized Modulation technology for distinct intensity difference from Run to Turn/Brake modes •Comes with easy to follow diagram & connectors •Made in the USA by real bikers! #10 ILL-OEM Fits H-Ds: XL, FX and FL models 73 thru 84 #11 ILL-OEM-B Plugs Fit H-Ds: FLH models 85 thru 90, Softail, FXWG and FXR models 86 thru 95, Dyna models from 95 thru 96, XL models from 86 thru 90, with OEM 6 pin taillight connector and wires in OEM location. Please view instructions on web site: www. badlandsmotorcycleproducts.com #12 ILL-OEM-A Plug-In H-Ds: Dynas 97-present, Sportsters 99-03, Softails 96- present including Deuce (not Rockers, see ILL-01-ROC), all FLH, FLHT, Road Kings, Road Glides and Street Glides 97- present #13 ILL-OEM-C Plug-In H-Ds: 2004 Sportsters to present.

11

10

ORIGINAL AND PLUG-IN ILLUMINATOR™: RUN, BRAKE AND TURN MODULE

maintains your turn signal function too. Increase your visibility from the rear of the motorcycle. This new generation is compatible with the new TSM, TSSM & HFSM module / security system. Since this version does not have our Load Equalizer feature , it is more reasonable to build, so we can pass the savings on to you. And if you change your mind and switch to LEDs later, just add the appropriate version of our Load Equalizer III at that time! •Designed for security system Harley-Davidsons as well as earlier style turn signal modules •Works with your stock OEM turn signals •Works on 1156 and other similar single filament incandescent bulbs

#1 ILL-01 “The Illuminator™ module” Fits H-Ds: XL, FX and FL models from 73 thru 84, and Custom Motorcycles. Also fits any motorcycle with modified wiring or without factory plugs. #2 ILL-01-B “The Illuminator™ module” Plugs Fits H-Ds: FLH models from 85 thru 90, Softail and FXR models from 86 thru 95, Dyna models from 95 thru 96, XL models from 86 thru 90, with OEM 6 pin taillight connector and wires in the OEM location. Please view instructions on web site: www. badlandsmotorcycleproducts.com In the “lost years” from 90 to 96, FL’s, Dynas & Sportsters may have different plugs than the 6 pin shown in photo 2. If you have an 8-pin plug that looks like the 6 pin, go to our web site, follow the instructions on our Modules page, and we will build one for you. On Dressers, if you have an 8-pin Deutsch plug, we will build that for you too. If you have a Sportster with 3 plugs, use our ILL-01 hard wire module. #3 ILL-01-A “Plug-In Illuminator™” Security System compatible! Fits H-D: FLH models 97 to present, Softail models from 96 to present including Deuce Softails (not Rockers, see below), Dyna models from 97 to present, XL models from 99 thru 03. #4 ILL-01-C “Plug-in Illuminator™” Security compatible! Fits H-D: Sportsters models 04 to present #5 ILL-01-ROC Fits H-D: Rockers (for changing out OEM Rear Turn Signals only) #6 ILL-01-V-ROD Fits all H-D: V-Rods Hardwire, 100% Security System compatible.

This Module Triples Your Visibility In The Rear Webster defines Illuminate as to supply or brighten with light, to make understandable, clarify, to provide with understanding and to enlighten. Think about this, snap a set of red lenses into your rear stock turn signals or custom turn signals, and install the Illuminator™ Module. Now your bike has 3 running lights , hit your brake, and you have 3 brake lights . Touch your turn signal button, and you maintain your turn signal function while the other side remains a running light, or if you are braking, a brake light. Don’t confuse them with a flashing brake light; let them know what you are doing with our Illuminator. After all, shouldn’t you be the one who decides when there is real danger ahead? Designed to work in conjunction with H-D Self Canceling Signal Modules or an OEM flasher system. We hold the patent, beware of cheap copy cats! • Built-in Load Equalizer III •Works with your stock OEM turn signals with stock 1156 single function Incandescent bulbs. •Works with custom Incandescent small turn signals, Halogen and LEDs too. Runs mixed front & rear. •Optimized Modulation technology for distinct intensity difference from Run to Turn/Brake modes •Easy to follow instructions and connectors or plugs included. • Security System compatible! Works on TSM / TSSM / HFSM. •Made in the USA with quality components by Americans!

2

1

12

13

*

4

3

www.badlandsmotorcycleproducts.com

THE ILLUMINATOR™ “OEM” PLUG-IN WITH “CHRIS PRODUCTS” RED LENSES

Increase your visibility from the rear, comes with 2 “Chris Products” premium red lenses! This new generation is compatible with the new TSM, TSSM & HFSM module/security system. Since this version does not have our Load Equalizer feature, it is more reasonable to build. Now we can pass the savings on to you by eliminating a feature you never intended to use. And if you change your mind and switch

•Works on 1156 and other similar single filament incandescent bulbs •Optimized Modulation technology for distinct intensity difference from Run to Turn/Brake modes •Comes with easy to follow diagram & connectors •Made in the USA by real bikers! #14-A ILL-OEM-B-RL-A Plugs fit H-Ds: 6 pin OEM taillight connector: FLH & FXRT models 86 – 90 comes with A style lenses. Please view instructions on web site: www.badlandsmotorcycleproducts.com #14-B ILL-OEM-B-RL-B Plugs fit H-Ds: 6 pin OEM taillight connector: Softail, FXR models 86 - 95, Dyna models 95 & 96, XL models from 86 - 90. Comes with B style lenses. Please view instructions on web site. #15-A ILL-OEM-A-RL-A Plug-In H-Ds: all FLH , FLHT, Road Kings, Road Glides and Street Glides 97- present with large turn signal bar and flat large lenses . Comes with A style lenses. #15-B ILL-OEM-A-RL-B Plug-In H-Ds: Dynas 97- present, Sportsters 99-03, Softails 96- present including Deuce, all FLH, FLHT, Road Kings, Road Glides and Street Glides with FX style turn signals . Comes with B style lenses. #15-C ILL-OEM-A-RL-C Plug-In H-Ds: Dynas 97- present, Sportsters 99-03, Softails 96- present including Deuce, all FLH, FLHT, Road Kings, Road Glides and Street Glides with Deuce style turn signals . Comes with C style lenses. #16-C ILL-OEM-C-RL-C Plug-In H-Ds: Sportsters 2004 – present. Comes with C style lenses.

A-FL

6

5

14

15

B-XL / FX

Beware of cheap copy cats that have theirs made overseas. They make more money, but sell you a cheap module with inferior components. All of our modules are potted with high heat resistant epoxy and UL94V-0 ABS boxes, with mounting tabs. The copy cats use “heat shrink.” Give me a break. How cheesy is that?

C-DEUCE

16

www.badlandsmotorcycleproducts.com

to LEDs later, just add the appropriate version of our Load Equalizer III at that time! •Designed for security system Harley-Davidsons as well as earlier style turn signal modules •Works with your stock OEM turn signals

PLUG-IN ILLUMINATORS™: RUN, BRAKE AND TURN MODULES WITH “CHRIS PRODUCTS” RED LENSES

#8-C ILL-03-RL-C Plug-In 8 pin plug / Illuminator™ with C Deuce style lenses / Fits H-Ds: XL 99 thru 03 models with Deuce style signals, FLH models 96 thru present with Deuce style signals, Dyna models from 98 thru present with Deuce style signals and Softail models from 98 thru present with Deuce style signals including Deuce model Softails (not Rockers, see ILL-01-ROC) #9-C ILL-04-RL-C Plug-In 6 pin flat plug / Illuminator™ with C Deuce style signals, Fits H-Ds: XL models from ‘04 thru present.

We now offer the “Illuminator™” Run, Brake and Turn Module with Chris Products red lenses . We have packaged these products together, to make being seen from the rear as easy as possible for you. These red lenses fit your stock turn signal assemblies, to give you 3 running lights, 3 brake lights and maintain turn signal function. Match the year motorcycle you have, with the style of turn signal lenses on your motorcycle. #7-A ILL-02-RL-A Plug Fits 6 pin plug / Illuminator™ with A style lenses. Fits H-Ds: FLH models from 86 thru 90. Please view instructions on web site: www.badlandsmotorcycleproducts.com #7-B ILL-02-RL-B Plug Fits 6 pin plug / Illuminator™ with B style lenses. Fits H-Ds: Softail, FXR and Dyna models from 86 thru 96, XL from 86 thru 90. Please view instructions on website. #8-A ILL-03-RL-A Plug-In 8 pin plug / Illuminator™ with A style lenses. Fits H-Ds: FLH models from 97 thru Deuce style signals #8-B ILL-03-RL-B Plug-In 8 pin plug / Illuminator™ with B style lenses. Fits H-Ds: Softails and Dyna models from 97 up to Deuce style signals, XL models from 99 thru 03

A-FL

This new module is a custom bike builders dream! It also works perfectly on older Harley-Davidsons that did not come with the H-D canceller system. It has several of our existing modules built into one module. This module controls THE ILLUMINATOR™ PRO III

This new module is a custom bike builders dream!... it controls every feature you would want your turn signal system to do. Beware of lame copy cats that have theirs made overseas. They make more money but sell you a cheap module with inferior components.

8

•Built in solid state automatic canceller •Built in Load Equalizer III functionality, no heat issues •Front run & turn signal for single filament bulbs, Halogen bulbs and LEDs •Rear run, brake and turn signal functions like our “Illuminator™”module •Optimized Modulation technology for distinct intensity difference from Run to Turn/Brake modes •Built in the USA with quality components by real bikers Now with 2 independent turn signal indicator wires for use with LED OR micro-bulb indicators in the Speedo, Dakota Digital instrumentation or Badlands Digital Mirrors! #17 ILL-PRO-III Illuminator™ Pro III for custom bike builds, “Manufactured Custom” V-twins, or Harley-Davidsons without any auto-canceling system. •Emergency flasher mode without heating up •Cancels at any time (quick lane changes)

B-XL / FX

every feature you would want your turn signal system to do. Automatic canceling, front running lights and turn signals on single or dual filament, Halogen or incandescent bulbs and LEDs.

7

C-DEUCE

9

17

Rear running lights, brake light function and turn signals on single or dual filament, Halogen or Incandescent bulbs as well as LEDs, with our Load Equalizer III function built-in. Runs LEDs, or up to 70 watts per corner / each station.

Made in the USA by real bikers!

tavernermotorsports.com.au

Made with FlippingBook - Online catalogs