6-Step Installation Overview These diagrams show you the general steps for installing underfloor heating under a tiled floor. Full step by step instructions are supplied with each product, but they can also be downloaded from www.cosytoes.co.
1. Plan and prepare the floor To help you plan where to install your heating system it may be useful to sketch the layout of the room and mark the area to be heated. Ensure that the subfloor is prepared (smooth and flat) as required for the final floor finish. 2. Lay the system efficiently These diagrams show how easy it is to install the heating mats in any area and around any obstacle.
Obstacle Cut
Obstacle Cut
3. Start laying the system Cut the fabric backing and bend the heating cable to fit the room layout.
Obstacle Cut
Obstacle Cut
Obstacle Cut
4. Fix the system in place Stick your system to the prepared subfloor. We recommend that you prime a concrete subfloor with an acrylic primer before you stick the mats down. Also install the floor probe (supplied with timerstat) between two heating cables. Note: The heating cable MUST always be tested prior to tiling. 5. Apply tile adhesive Some tilers prefer to tile directly over the heating mat, or apply a thin layer of tile adhesive or self-levelling compound over the system using a non toothed spreader to protect the heating cable from damage. 6. Lay the flooring Once the tile adhesive or self-levelling compound covering the heating mat has dried, apply flexible tile adhesive and tile.
Obstacle Cut
17
Made with FlippingBook - professional solution for displaying marketing and sales documents online