The 10 Essentials of Underfloor Heating
1. Service We are always happy to help our valued customers and especially the installer. We will exchange unused goods for a different size, send out replacements for probes free of charge and discuss any other problems that you have. 2. Lifetime Guarantee Cosytoes’ high performance, teflon insulated heating cable is manufactured to the highest standards and specifications, which is why we can confidently give a lifetime product guarantee. See www. cosytoes.co. 3. Timber floors Cosytoes is suitable for fixing directly to timber floors. Boarding out the floor with a well fixed tile backer board will provide an excellent base for the heating cable and will improve efficiency. 4. New concrete floors A concrete sub-floor that has been laid over an insulation layer (as required for new buildings - post 1994) acts as a storage radiator. It takes longer to heat up (hours) but also takes longer to cool down. Installing on a tile backer board will give a much faster heat-up time. 5. Old concrete floors Non-insulated concrete floors will soak up the heat and you will end up with poor performance and high-energy costs! Only lay on these floors using a suitable tile backer board.
6. Sizing and laying If you need help planning your underfloor heating system, please don’t hesitate to contact us and we will be more than happy to assist you. 7. Controllers Whilst giving you a luxurious warm floor, Cosytoes systems deliver the same results as conventional heating but operate at a much lower temperature giving you maximum economy and efficiency. 8. Laminate, timber or carpet Cover the TradeMat Plus with a good thickness of self-levelling screed to fit a floating floor of laminate or timber as required. Always ensure there is free space around the edge of the room so the gripper fixings don’t damage the heating cable. Or use Cosytoes Softmat system that has been specifically designed to fit under laminate or wood flooring. 9. Running Costs Our combined time and temperature controllers help keep energy costs to a minimum, TradeMat Plus will use just 2p/ hour/ sqm (approximately) in a modern home. Insulating the floor with tile backer board can improve the efficiency and heat- up time by up to 50%. 10. Wet Rooms All Cosytoes heating cables conform to IPX7 and are suitable for installation in wet rooms, which means that our TradeMat Plus can help dry a bathroom floor in a matter of minutes.
All Cosytoes ® products are manufactured to comply with UK and EU safety standards. Our underfloor heating cables are also manufactured to meet the underfloor heating standard EN 60335-2-96:2002 and are IPX7 rated for use in wet areas.
Sales Tel: 0113 2577 588 | Customer Service/Technical Helpline: +44 (0) 113 2577 588 Fax: 0113 236 2300 | Email: info@cosytoes.co Address: Bramley House, Bath Lane, Bramley, Leeds, LS13 3BB.
E&OE March 2022
Made with FlippingBook - professional solution for displaying marketing and sales documents online