MCS - Radici SeAdhesive – MSDS

CHIMIVER PANSERI S.p.A. ADESIVER RE 400 RF

Revision nr.7 Dated 26/05/2021 Printed on 24/01/2022 Page n. 4 / 9 Replaced revision:6 (Dated 26/05/2021)

SECTION 9. Physical and chemical properties

9.1. Information on basic physical and chemical properties

Properties Appearance

Value paste ivory

Information

Colour Odour

characteristic Not available Not available Not available Not available Not available 60 °C Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available 1,28

Odour threshold

pH

Melting point / freezing point

Initial boiling point Boiling range Flash point Evaporation rate

>

Flammability of solids and gases Lower inflammability limit Upper inflammability limit

Lower explosive limit Upper explosive limit Vapour pressure

Vapour density Relative density

Solubility

Partition coefficient: n-octanol/water

Auto-ignition temperature Decomposition temperature

Viscosity

Explosive properties Oxidising properties

9.2. Other information

VOC (Directive 2010/75/EU) :

0,03 % - 0,35

g/litre

SECTION 10. Stability and reactivity 10.1. Reactivity

There are no particular risks of reaction with other substances in normal conditions of use.

10.2. Chemical stability

The product is stable in normal conditions of use and storage.

10.3. Possibility of hazardous reactions

No hazardous reactions are foreseeable in normal conditions of use and storage.

10.4. Conditions to avoid

None in particular. However the usual precautions used for chemical products should be respected.

10.5. Incompatible materials

Information not available

10.6. Hazardous decomposition products

Information not available

SECTION 11. Toxicological information In the absence of experimental data for the product itself, health hazards are evaluated according to the properties of the substances it contains, using the criteria specified in the applicable regulation for classification. It is therefore necessary to take into account the concentration of the individual hazardous substances indicated in section 3, to evaluate the

EPY 10.5.2 - SDS 1004.14

Made with FlippingBook interactive PDF creator