in-lite brochure EN - 2016-2017

THE BOOKOF IN-LITE

L E D OUTDOOR L I G H T I N G 2 0 1 7

MAKE YOUR OUTDOOR SPACE UNIQUE WITH IN-LITE The outdoors is the perfect place to recharge and enjoy life. Outdoor lighting lets you enjoy your yard or deck 24/7, regardless of the season. We are here to help you make your outdoor space unique!

inspiration

UNIQUELY INVITING 30 inspiration

UNIQUE LIVING 16

MORE THAN JUST A BRAND 28

IN-LITE LAB. 51

INFORMATION The in-lite 12-volt system

14 20 26 36

LED outdoor lighting

Design a garden with lighting

Installation

PRODUCT RANGE Ground lights

42 44 46 48

UNIQUE GREENERY 8 inspiration

UNIQUELY SAFE 22 inspiration

Bollards

STEP-BY-STEP OUTDOOR LIGHTING 38

Wall lights

Outdoor spotlights

Warranty

OUR GUARANTEE TO YOU

HIGH-QUALITY DUTCH DESIGN

ENERGY-EFFICIENT & DURABLE

We personally design all of our outdoor lights in order to offer you a cutting-edge and high-quality product range.

Our fixtures are fitted with high-quality LED light sources that are extremely energy- efficient and very long-lasting.

SIMPLE & FLEXIBLE

5-YEARWARRANTY

in-lite lighting works on low voltage and is easy to install, modify and expand.

Our comprehensive 5-year warranty lets you enjoy your new lighting without a care.

INSPIRATION

UNIQUE GREENERY

Lots of greenery makes your yard, roof patio or deck even more attractive and inviting. Plants and trees bring your yard to life and should also be enjoyed after dark. Outdoor lighting gives your landscape the attention it deserves after dark and lets you turn your outdoor living space into an inviting retreat full of moving shadows and unique contrasts.

01 - BIG NERO under weeping willow

02 - MINI SCOPE under work of art

03 - MINI SCOPE DUO among bamboo shoots

01 - NERO

02 - FLUX under bush

03 - MINI SCOPE among pampas grass

04 - BIG NERO under solitary tree

05 - HYVE under bush

06 - BIG SCOPE NARROW under columnar tree

Unique With a light distribution of up to around 10 meters and a light angle of 18 degrees, the BIG SCOPE NARROW is perfect for illuminating tall, narrow trees.

IMPLEMENTED FIXTURES

OUTDOOR SPOTLIGHT MINI SCOPE p. 8/10/12

GROUND LIGHT FLUX p. 10

BOLLARD LIV LOW CORTEN Available in two heights for use between low or tall plants. p. 12

GROUND LIGHT HYVE p. 11

01 - LIV LOW CORTEN

02 - MINI SCOPE among ornamental grass

GROUND LIGHT BIG NERO p. 8/10

OUTDOOR SPOTLIGHT MINI SCOPE DUO p. 9

GROUND LIGHT NERO p. 10

OUTDOOR SPOTLIGHT BIG SCOPE NARROW p. 11

The transformer The transformer controls the lighting using a light-sensitive sensor and, if desired, a timer. The transformer can be plugged into any electrical socket.

EASY-LOCK & AND CABLE CONNECTOR CC-2 The Easy-Lock and CC-2 cable connector can be literally connected with the flick of a wrist. A cable clamp is used to secure the cord in the connector. Twisting the cap places pressure on the contacts in the insulation material, creating a strong connection. The special gel in the connector protects the connection is against moisture and other external factors. The composition of the cable ensures that it is not damaged. This also makes it easy to move the Easy-Lock and CC-2 and change your lighting plan at any time.

Fixtures A cable with a mini- connector is attached to each fixture for connecting with the Easy-Lock system. Extension cord If you want to continue the lighting beyond the 12-volt cable, you can use an extension cord and connect it to the Easy-Lock.

THE IN-LITE 12-VOLT SYSTEM

The cable The 12-volt cable is rolled out from the transformer and guided along the fixtures. It can end anywhere in the yard and does not have to form a closed system. A cap is slipped onto the end of the cable.

FRONT VIEW EASY-LOCK

FRONT VIEW CABLE CONNECTOR CC-2

The Easy-Lock The Easy-Lock connects the fixture to the 12-volt cable, enabling the fixture to function.

CC-2 cable connector The cable connectors make it possible to easily create one or more cable branches in order to guide the cable along the various fixtures.

in-lite outdoor lighting is based on low voltage (12 volt). This means our lighting is safe and easy to install.

Would you like to know more about installing our lighting? Then go to page 36 or go to in-lite.com/learning for more information.

TOP VIEW EASY-LOCK

TOP VIEW CABLE CONNECTOR CC-2

INSPIRATION

UNIQUE LIVING

Your outdoor space is part of your home. That is why illuminating your outer walls is a great starting point for illuminating your outdoor space. It brings the outside in and enhances the appearance of your property after dark.

01 - SCOPE

02 - NERO under an overhang

03 - NERO under pear tree

04 - ACE

05 - NERO

IMPLEMENTED FIXTURES

GROUND LIGHT NERO p. 16/17

GROUND LIGHT BIG NERO p. 18

WALL LIGHT ACE UP-DOWN 100-230V This fixture can be connected directly to a 100-230V power supply. p. 18

BOLLARD ACE This fixture has a tilting light source. p. 17

OUTDOOR SPOTLIGHT BIG SCOPE p. 18

01 - BIG SCOPE

OUTDOOR SPOTLIGHT SCOPE p. 16

02 - ACE UP-DOWN 100-230V

03 - BIG NERO

IN-LITE OFFERS LED OUTDOOR LIGHTING FOR ALL LIGHTING NEEDS

Sustainable and energy-efficient What is it that makes LED so sustainable? First of all, LED light sources are highly energy-efficient. Compared to a traditional light bulb, an LED light uses 80% less energy. LED light sources are also extremely long-lasting. Under normal conditions, an LED light will last up to ten times longer than, for example, a halogen light. LED suitable for a wide range of uses The sustainable properties of LED are certainly not at the expense of the light output. With today’s technology, LED is more than a worthy substitute for halogen lights and light bulbs. Since the early days of LED technology, in-lite has been developing outside lights using this light source. We now offer a range of LED lights that are suitable for all types of uses. Whether you wish to illuminate a path with soft, diffuse light or accent a beautiful tall tree with bright, concentrated light, our lights let you illuminate your entire outdoor space, including a pond. Natural light color Our outdoor lights produce a warm and inviting light of around 3,000 Kelvin with a good color rendering. This means that the colors of your yard are reflected truly and naturally and easily recognizable. We have also designed our lights to provide a consistent light color throughout the life span of the light.

Solid construction Since we design our lights based on the light source, we make the most of all of the advantages offered by LED technology. We also tailor the shape and use of materials to the specific requirements of this type of light source, especially since conditions outdoors can be extreme. This means a solid construction to protect the LEDs and electronics frommoisture and other environmental hazards. We use materials like stainless steel, coated aluminum and high-quality plastics. And then there are the challenges of LED cooling. Even though LED lights are much more efficient than traditional light sources (they consume less energy and produce much less heat), proper cooling of LEDs is very important in connection with a long life span and light color. Our spotlights in particular, which generate a higher light output, have a design that takes this factor into account. Guaranteed enjoyment As you can see, the development of our LED lights is the result of extensive R&D work. We also test our products under a variety of scenarios. This ensures a quality product and no hesitation to offer a five-year warranty - your guarantee of many years of use and enjoyment of your in-lite LED outdoor lights!

LED lights are currently the most sustainable, durable and

environmentally friendly lights available. That is why more and

more people are switching to LED lighting in their homes. But LED

technology is also the most sustainable option for outdoor lighting.

in-lite develops its own LED lighting in collaboration with leading

manufacturers of high-quality LED technology. This ensures that

our LED outdoor lights are of superior quality and a suitable fixture

for every type of outdoor use. A look behind the scenes...

INSPIRATION

UNIQUELY SAFE

You also want to be able to find you way around your home and yard after dark. Proper lighting makes this possible. Get inspired and discover how to illuminate a garden path, stairs or entrance in an inviting, attractive and, above all, functional manner.

01 - ACE CORTEN next to a path

02 - HYVE in the stairway

03 - BLINK

04 - NERO

05 - HYVE 22 in a path

06 - MINI SCOPE

IMPLEMENTED FIXTURES

GROUND LIGHT NERO p. 23

GROUND LIGHT HYVE p. 22

01 - ACE UP-DOWN CORTEN 100-230V

GROUND LIGHT HYVE + BOX 100 p. 24

02 - SCOPE under olive tree

GROUND LIGHT HYVE 22 This is a driveover fixture. p. 23

03 - ACE CORTEN

04 - HYVE + BOX 100 under mailbox

WALL LIGHT ACE UP-DOWN

CORTEN 100-230V p. 24

WALL LIGHT BLINK p. 22

BOLLARD ACE CORTEN p. 22/24

OUTDOOR SPOTLIGHT MINI SCOPE p. 23

OUTDOOR SPOTLIGHT SCOPE p. 24

Getting started! Time to get started with your own lighting plan! Our inspiration pages feature examples of the most commonly encountered garden elements and how you should illuminate them.

There are four types of light: direct light, indirect light, diffuse light and accent light. These light types have been shown in the diagram. For each element in your lighting plan, you must draw light spots that correspond with the mentioned types of light. STEP 4: DETERMINE THE TYPE OF FIXTURE For each element, examine what type of fixture you want to use. You have a generous range of options. For example, ground spotlights allow you to easily mark or illuminate something from the ground. But, for example, if you want to create decorative lighting for a border or driveway, an upright fixture will be your best option. Various types of wall lamps can be used to illuminate walls or fences. Direct the light downwards or opt for an architectonic appearance with an up and down lighter. Spotlights are multifunctional. They are easy to direct and can

STEP 1: THE DESIGN The design of your garden can serve as the perfect foundation for your lighting plan. Do you not have a design? Then it can be useful to draw the garden to scale in order to gain a better overview. Clearly mark the various elements in your garden, e.g. the patio, lawn, flower beds, pond, flowerpots and garden table. STEP 2: DECIDE WHAT YOUWANT TO ILLUMINATE When creating a lighting plan, you should think about which garden elements you want to illuminate in the evening. For instance, it can be useful to illuminate the path to the door or patio. You can create nice shadows on fences or walls by illuminating plants. But also consider attractive corners or special shapes, which can be properly highlighted using light. Our brochure and website feature enough inspiration to help you when compiling your own lighting plan! STEP 3: CONSIDERWHAT KIND OF LIGHT YOU NEED You must now determine the function of each element and what will be the most appropriate kind of light. For example, you want lights on your patio to look decorative, while lights used to illuminate trees must be of high intensity.

be inserted into a border or, for example, mounted on a pergola or canopy. STEP 5: SELECT THE FIXTURES The previous steps should allow you to easily select appropriate fixtures for your lighting plan. Each fixture in our range comes with an explanation about what kind of light is emitted and for which purposes it is suitable. You can also examine the technical details of fixtures, such as light distribution and light angle. Of course, the

appearance of fixtures also plays a role. Do you prefer squared edges or rounded contours? And which materials and colours appeal to you? Fixtures are available in stainless steel or aluminium, with finishes in dark grey, warm silver, white or Corten. To make it easy for you, product series are available with different types of fixtures in the same design.

DESIGN A GARDEN WITH LIGHTING Well illuminated gardens are based on effective designs. You can have a professional lighting plan created by a landscape architect or your in-lite dealer, or you can do it yourself. In just 5 steps, you can create a lighting plan that suits your garden and creates a well-balance atmosphere.

LIGHT TYPES

Direct light The light source shines directly on intended surfaces, like fences, driveways or façades. Fixtures with direct light show fine details and create clearly defined shadows.

Indirect light The light reflects against intended surfaces, like walls. Fixtures with indirect light make spaces look larger and create a pleasant atmosphere.

Diffuse light Well-distributed and

Accent light Concentrated light with high intensity. Fixtures with accent light are suitable for illuminating trees and other objects.

decorative light. Fixtures with diffuse light provide uniform light distribution and soft shadows.

MORE THAN JUST A BRAND

in-lite is more than just an outdoor lighting brand; we are a company with a mission. Each and every day, a team of around twenty enthusiastic professionals does its best to make the outdoors exceptional. We achieve this by developing quality outdoor lights, but above all by inspiring consumers as much as possible and showing them that lighting fits perfectly in any outdoor space. But we do not accomplish this alone. Our products are sold by dealers and distributors in various countries throughout Europe and North America and are installed by professionals (landscapers) as well as end-consumers. If you want to find a dealer near you, please visit in-lite.com/dealers .

INSPIRATION

UNIQUELY INVITING

The outdoors are perfect for relaxing and enjoying good company and good food. Outdoor spaces with a pleasant deck, inviting lounge corner or attractive overhang are designed for enjoyment. They make your backyard a pleasant place to spend time and, with the right lighting, you can enjoy this space all year long.

01 - MINI SCOPE

among bamboo shoots

02 - FLUX

03 - LIV

04 - MINI SCOPE

01 - ACE DOWN DARK in overhang

02 - CURV

03 - ACE UP-DOWN CORTEN

IMPLEMENTED FIXTURES

GROUND LIGHT FUSION 22 RVS p. 34

OUTDOOR SPOTLIGHT MINI SCOPE MINI SCOPE is perfect for integrating into overhangs and pergolas. p. 30

GROUND LIGHT FLUX p. 30

GROUND LIGHT FUSION p. 34

WALL LIGHT CURV p. 33

01 - WEDGE on anthracite fence

02 - DB-LED (WW)

WALL LIGHT WEDGE p. 34

among ornamental grass

WALL LIGHT ACE DOWN DARK

03 - FUSION and

FUSION 22 RVS in bamboo planking

Separate lenses are available for this fixture, which means other lighting effects can easily be created. p. 32

WALL LIGHT ACE UP-DOWN CORTEN p. 33

GROUND LIGHT DB-LED (WW) p. 34

If you want to install your in-lite lighting personally, we have put together a few important tips for you. Our website also contains several helpful instruction videos to assist you during installation. INSTALLATION

Step 3 The Easy-Lock The Easy-Lock is used to connect the fixture to the cable. The duct is clamped onto the cable, inserted into the Easy-Lock and secured with the cap. It is impor- tant that the Easy-Lock is attached properly because it ensures good electrical conduction and optimal illumination of your light. The special gel provides the connection with extra protection against moisture and other external factors. Tip: If you decide to move the light to another location, the Easy-Lock can be easily detached and connected to a dif- ferent section of the cable – without damaging the cable! Step 4 The mini-connector You then attach the mini-connector to connect the fix- ture using the Easy-Lock.The soft PVC casing protects the connection frommoisture and dirt. The mini- connector also lets you easily pull the fixture cable through a hole in a tile or wall.

Step 1 The transformer The first step is to install the transformer around 50 cm above the ground in a fence or post in your yard. The light sensor is installed on the outside, since this causes the lighting to switch on at dusk. Make sure that the light sensor is not placed closed to artificial lighting because the sensor will react to it. The cable lugs provided are used to connect the cable to the transformer. These ensure good electrical conduction and protect the transformer from damage. Tip: Want to save energy? Do not leave the lighting switched on all night long (‘dusk to dawn’ setting), but set the number of hours that the lighting is on after sunset (‘on hours’ setting).

Step 2 The cable Once you have connected the cable to the transformer, you can roll it out. Install it along paving and borders as much as possible for easy access. Use extension cords for fixtures installed further away from the main cable. You can also make cable branches to guide the cable more ef- fectively along the fixtures. This is done using a cable connector. The cable can end anywhere in the yard and only needs to be secured with the cap provided. A layer of soil on top of the cable is enough to conceal it. Tip: Make a cable plan beforehand and include the location of the cable, fixtures, extension cords and cable connectors in it. More information on how to create a good cable plan can be found on our website.

Tip: To install a fixture further away from the cable, use an extension cord between the mini-connector on the Easy-Lock and the fixture. Step 5 The fixture Finally, install the fixture at the desired location. Always follow the instructions in the manual, which can be found on our website. If you want to install ground lights in your deck, keep in mind that you will probably have to drill holes in the tiles or boards. It is important that this be done properly because a hole that is not drilled perfectly round can cause installa- tion problems. A dealer or landscaper can take care of this for you, as they have the right tools. If you would prefer to do it yourself, visit our Learning Center in-lite.com/learning and watch our drilling videos.

All tips and videos can be found at in-lite.com/learning

STEP-BY-STEP OUTDOOR LIGHTING

Our system offers ultimate flexibility. Want to start with a few lights and add more later? No problem! Have you seen the new collection and want to update the lighting in your yard? Our system lets you easily adapt and expand the lighting in your yard. Blogger Anne from ‘Remade with love’ had already determined which yard elements she wanted to illu- minate. She then connected lighting fixtures in her backyard one by one. She started with a few outdoor spotlights and a wall light to highlight the ornamen-

tal apple trees and garden house. The next element to be illuminated was her favorite part of the yard: the eating area. Here she installed ACE wall lights on the fence. “This light produces a wonderful beam of light that does not shine directly into your eyes and I really like the cool dark design,” says Anne. She has also installed NERO ground lights and MINI SCOPE outdoor spotlights to accent the juneberry tree and hydrangeas. Anne explains, “The lighting really brings out the character of the plants.” And, last but not least, as the crowning final touch, Anne placed a num- ber of upright lights in the ornamental grass. Anne comments, “The ambiance that the outdoor lighting creates lets us enjoy the appearance of our yard even longer each day and, not only that, but also see each other, which I personally enjoy.”

STEP 1 TRANSFORMER CB-056/M | CABLE CBL-40 14/2 | 01 - 2 X SCOPE | 02 1 X ACE UP-DOWN DARK 100-230V

RANGE

GROUND LIGHT

NERO

Ground lights can be buried in pavement, wood or gravel, for instance. They disappear into the landscape during the day, while producing a unique light effect after dark. We offer a complete range of fixtures that open the door to an endless number of possibilities. A few examples...

THE BIG BOYS

You can also accent trees with ground lights. The robust NERO and BIG NERO ground lights can be easily inserted into the ground for illuminating large trees or walls from below. NERO has a light distribution of around 5 meters, while BIG NERO can reach around 10 meters. The use of several ground lights to evenly illuminate the crown of the tree produces an optimal effect. Please note that special installation instructions apply for BIG NERO.

Tip Want to illuminate a bush or wall from the ground? Use the FLUX fixture, which produces accent lighting with a range of around 3 meters.

HYVE + BOX 100

IN-LITE.COM/ PRODUCTS

FUSION + PLATE 75

FLUX

LED GROUND LIGHTS

ADJUSTABLE LIGHT

FISH EYE 100X100 (WW)

Our LED ground lights FUSION and HYVE are fitted with special lenses to yield a diffuse light that does not produce glare. The soft glow of FUSIONmakes it perfect for use on decks and in other outdoor elements. If you are interested in a slightly higher light output for a driveway, for example, HYVE is the right solution. Both fixtures are available in different models:

In some situations, it may be best to use a ground light with an adjustable light source, such as FISH EYE 100x100, SENTINA 150x150 or BIG NERO. These lights are perfect for illuminating climbing plants, bushes, fences and outer walls. For the best effect, consider the height of the element to be illuminated and the light distribution this requires when choosing a fixture.

regular 60 mmmodel with stainless steel ring and the smaller 22 mm version with or without a stainless steel ring. If you are interested in a more targeted light output, a rectangular stainless steel cover plate and a special square box are available (BOX 100) for the 60 mm version. BOX 100 is also perfect for use between paving stones or on loose surfaces.

SENTINA 150X150

RANGE

TASTES DIFFER

BOLLARDS

During the daytime, the upright lights serve a decorative function in the yard. Design and color are therefore important factors to consider when choosing a light. The in-lite product range includes outdoor lighting in a wide range of colors and models. Our lights in warm silver and dark grey fit in perfectly with almost any landscape design. Is your taste a bit more edgy? We also offer fixtures with a sleek white or luxurious corten steel finish.

The bollards in our range can be used to create ambiance on a deck, along a path or driveway or in a border. An upright light can be easily inserted into the soil or mounted onto a hard surface.

LIV LOW DARK

ATTRACTIVE BORDER

PATHWAY OR DRIVEWAY

Borders can be attractively illuminated with fixtures that produce a pleasant diffuse light. The upright lights from our LIV series are perfect for this. LIV LOW is designed for borders with low edging and LIV for those with higher plants. A combination of high and low fixtures is always a good option as well!

Want to illuminate a pathway or driveway with upright lights? Choose fixtures that produce direct light, such as SENTINA or ACE, which create clear lines and shadows on the surface. This not only produces an attractive effect, but is also functional in that it illumi- nates your path or driveway. ACE lights also come with an adjustable light source, making this fixture highly ver- satile for use in numerous situations.

ACE CORTEN

Producing a corten steel finish is a time-consuming and complicated process. The first step is to cover the aluminum casing with a met- al coating. After the coating has hardened, the surface is treated to bring the metal particles to the surface. The fixtures are then placed in an acid bath to corrode the metal. Finally, the metal is post-treated so that the casing no longer produces metal particles and can be used directly in a yard.

LIV

SENTINA

RANGE

WALL LIGHTS

Our range of products includes a wide selection of wall lights. These can be used in a variety of ways, such as alongside French doors or repeatedly along a fence. For use next to a front door, for example, a number of our wall lights can also be connected to the power supply (100-230V).

CUBID WHITE

Tip If you want to illuminate a path or driveway from a wall, opt for a fixture like BLINK . The subtle CUBID is perfect for use along stairs.

NEXT TO THE DOOR

You can also ‘simply’ place a wall light next to your front door. If there is already a light source here, choose a 100-230V fixture like the ACE UP-DOWN 100-230V. This fixture produces an attractive angled light with straight lines both upwards and downwards. The ACE collection also includes 12V upright and wall lights, letting you create a comprehensive light plan for garden and home.

SHUTTER 2

ILLUMINATE YOUR YARDWALL

CURV

ACE UP-DOWN 100-230V

Installing several wall lights on a fence or wall at eye level produces at- tractive lighting. Wall lights WEDGE and BLINK produce a pleasant direct soft light downwards for accenting walls. A wall light that produces indirect light (like CURV), on the other hand, reflects the light onto the wall for a warm and inviting effect. Placing fixtures repeatedly on a fence also lets you accentuate the depth of the yard at night.

PERGOLA OR OVERHANG

Pergolas and overhangs can also be illuminated attractively with wall lights. A common model is ACE DOWN, which lets you create an attractive direct soft light aimed at a post or wall. The white version is perfect for creating a sleek Ibiza look. The SHUTTER (available separately) lets you determine

the exact width of the light beam. Prefer a more subtle fixture? Choose the MINI SCOPE small spotlight. With its adjustable wall bracket, it can be easily installed in the corners of your pergola or overhang and directed towards, for example, your lounge area.

BLINK DARK

MINI SCOPE

RANGE

OUTDOOR SPOTLIGHTS The LED outdoor spotlights in our product range are perfect for illuminating unique elements in the yard, such as statues, trees or bushes. You can easily insert our outdoor spotlights into the soil or use a ground plate to mount them onto a hard surface. For illuminating water elements, we have added a special underwater spotlight to the range.

SCOPE ACCESSORIES

All SCOPE spotlights are easy to direct and insert in the ground using the ground stake provided. A separate cap (SHIELD) is available for MINI SCOPE that shields the light on one side to prevent glare. The SCOPE BASE PLATE can be used to install the SCOPE or BIG SCOPE onto a harder surface. And the RISER 350 adapter raises the height of your spotlight so that the light beam is not blocked by any tall plants in front of the object to be illuminated.

DIVERSITY IS A NECESSITY

Our SCOPE collection lets you illuminate both large and small objects in your yard. The difference between the spotlights lies in the angle and distribution of the light beam, as shown in the table below. You can select the spotlight that best suits your situation,

based on the height and width of the element to be illuminated. With larger trees, a particularly attractive effect can be achieved by placing several spotlights around them. Three spotlights, for example, can evenly illuminate the crown of the tree.

SHIELD for MINI SCOPE

SCOPE BASE PLATE

RISER 350

UNDERWATER

A special underwater spotlight has been developed for illuminating ponds, fountains and other water elements. SUB produces a diffuse light that creates an enchanting effect. This spotlight has a weighted base plate and can also be used above water! Fact: SUB has an extra long connecting cable of around 5 meters so that the mini-connector can be placed outside the water.

SUB

MINI SCOPE

SCOPE

BIG SCOPE

BIG SCOPE NARROW

CA. 3,5M

CA. 2,5M

CA. 5M

CA. 2M

40º

24º

46º

18º

5 YEAR IN-LITE WARRANTY

Roof terrace Zoku Hotel Amsterdam

INNOVATION DISTINGUISHES BETWEEN A LEADER AND A FOLLOWER

in-lite pays great attention to the technical design of all its fixtures. That is why we can offer a five-year warranty on our fixtures and transformers.

in-lite lab. At in-lite, our goal is to inspire you to the max and inform you as best as possible. This includes great product combinations and lighting effects tailored to the most unusual of places and in the hippest cities, both in the Netherlands and abroad. The in-lite lab finds such places, illuminates them and shows them to the world. This gives you and the rest of the world a good idea about the countless possibilities of in-lite lighting and inspiration you can use in your own backyard. Dare to be different The in-lite lab. is always on the lookout for unique outdoor spaces and projects to illuminate in a creative way. Unusual rooftop gardens, decks and hotel gardens all fall in the category of outdoor spaces where the in-lite lab is eager to sink its teeth into. These spaces

are larger than average and with different needs. This means that they require a different approach to illumination. At the in-lite lab, we dare to be different and always seek out the right solution for every situation. Contact Do you own a unique outdoor space, such as a hotel (rooftop) garden or restaurant deck, and would like a creative lighting solution based on a personal approach, one that includes fixtures tailored to your specific preferences? If so, do not hesitate to contact the in-lite lab.

Should something go wrong, you can contact the landscape architect or dealer where you bought the product, and make use of the warranty. Your receipt or invoice will be your proof of purchase, so keep it in a safe place! If it is not possible to repair the product, you will always be given a replacement within the warranty period. If the required model is no longer

available, then we will offer you an appropriate alternative.

To keep your outdoor lights in good condition, you should, in the same way as the rest of your garden, perform regular maintenance. For simple maintenance tips, please visit in-lite.com/maintenance .

We advise you not to combine in-lite lighting with cables or transformers by other manufacturers; this will cause your warranty to be null and void.

IN-LITELAB.COM

INSTAGRAM.COM/INLITELAB

THE IN-LITE WARRANTY ALLOWS YOU TO ENJOY YOUR OUTDOOR LIGHTING WITH COMPLETE PEACE OF MIND!

EVO

by in-lite

evo·lu·tion (the; v; plural: evolutions) 1. gradual development or growth

AVAILABLE IN FALL 2017

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52

Made with FlippingBook flipbook maker