Complete Cementing Solutions Brochure

Solid Rigid Centralizers

Available in 3 1/2” to 20 ” sizes + any special sizes

OB12

Slip On Welded Positive Spiralizer

Oil Baron Supply’s Slip On Welded Spiralizer was designed for use in highly deviated horizontal wells and with line hangers. The heavy steel construction is very effective compared to other alloys and its construction provides maximum standoff. The Spiralizers can be directly installed on the pipe and are accompanied by Stop Collars positioned by set screws. This product has boat shaped spiral fins that reduce drag forces while running in pipe thus optimising mud displacement and minimising pressure drop. They have resistance to high side loads and are smoothly beveled on both ends to promote a lower coef fi cient of friction easing casing movement in either direction. The welding of the fins is performed under special conditions with low hydrogen coated electrodes. This ensures optimal strength and uniformity in every weld. In addition, all products under go a special iron phosphate coating process to prevent corrosion and are then coated by a special polyester powder. The products are shipped in assembled condition only. They can be custom made from a choice of seven boat pro fi le depths which cater to any hole diameter, They are available in sizes ranging from 3 ½ ” to 20”. Any special sizes or combination can be made available upon request.

Available in 3 1/2” to 20 ” sizes + any special sizes

OB13

Slip On Heavy Duty Welded Positive Spiralizer

Oil Baron Supply’s Solid Heavy Duty Spiralizers are specially designed to respond to extra heavy loads in highly deviated horizontal wells and for use with Liner Hangers. The heavy steel construction is highly effective as compared to other alloys. This Spiralizer can be directly installed onto the pipe by slipping it on and is accompanied by compatible Stop Collars beveled from one side positioned by set screws. This Spiralizer is equipped with hydrodynamic spiral fins that allow optimal mud displacement and minimal pressure drop across the Centralizer. In addition, they are particularly strong with high wear resistance. The wide symmetrical spiral fins are welded to the sleeve under special temperature conditions using extra low hydrogen coated electrodes and this further assures ultimate strength and uniformity in every weld. Resistance to corrosion is provided by a special iron phosphate coating process complemented by a coating of polyester powder. This product is shipped in assembled condition only. It is available in all sizes ranging from 3 ½ ” to 20”. Any special sizes or combination can be made available upon request.

13

Made with FlippingBook - Online catalogs