Stop Collars
Available in 4 1/2” to 20 ” sizes + any special sizes
SC03
Hinged Set Screw Stop Collar
Oil Baron Supply’s Hinged Set screw Stop Collars can be latched onto the casing pipe without having to be slipped on and are easy to install. They are particularly effective when low annular clearance is encountered. This particular design consists of two parts that are hinged at 180 degrees. The gripping force is created by one set of set screws which tighten the Collar to the casing firmly. All Stop Collars undergo a special iron phosphate coating process to prevent corrosion, and are then coated with a special polyester powder. This product is available in all sizes ranging from 4 ½ “ to 20 ”. Any special sizes can be made upon request.
Available in 4 1/2” to 20 ” sizes + any special sizes
SC04
Slip on Set Screw Stop Collar
Oil Baron Supply’s Slip on Set Screw Stop Collars is single piece Collar that uses one row of set screws to induce the gripping force. It is used where high axial loads are expected, and is effective where low annular clearance is encountered. This Stop Collar is easy to install because it simply slides onto the casing. These Stop Collars undergo a special phosphate coating process to prevent corrosion and are then coated with a special polyester powder. The product is available in all sizes ranging from 4 ½ “ to 20 ”.
23
Made with FlippingBook - Online catalogs