Operation Tab
This tab is where the controls to start/stop the oven or enable/disable the burner are located.
7.
8.
3.
1.
5.
9.
2.
4.
6.
1. Oven Start Button – Pressing this button will cause the fans to sequence on and begin the sequence of starting the purge cycle to get the oven to the point where it is ready to ignite the burner. 2. Oven Stop Button – Pressing this button will cause the safe shutdown procedure to being. If the oven is below the safe shut down temperature, the fans turn off. 3. Burner Toggle Switch – Pressing this toggle switch will enable or disable the burner. The switch will only function if all interlocks are proven, so it is OK to leave the switch in the “Enable” position all the time, unless you wish to turn the burner off while the fans are running. 4. System Reset – If there is a fault, pressing this button will reset the fault so that the oven can re-attempt to ignite or re-purge. 5. Batch Start – Pressing this button will start the batch timer. If the operator has selected “Auto Batch Start” then the button will automatically energize after the oven reaches the desired temperature set point. 6. Batch Stop – Pressing this button will stop and reset the batch timer. 7. Oven Status – Displays what the oven is currently doing. 8. Temp and Time Values – Displays the current temperature and batch time settings. 9. Batch Presets – Presets allow different temperature and time values to be entered for different coatings. The operator can then select which preset to run for the desired part.
4
Made with FlippingBook - professional solution for displaying marketing and sales documents online