FIRST THINGS FIRST Get your control panel up and running.
INSTALL
HOW TO POWER ON THE CONTROL PANEL
* If the welcome screen does not load, launch the setup wizard using the following menu selections: 1) disarm the panel, 2) press Date & Time, 3) press Settings, 4) press Advanced Settings, 5) enter the default panel code of 1111, 6) press Setup Wizard, and 7) launch the setup wizard.
1 Plug in the power supply. If the panel does not turn on right away, please allow time for the panel to charge.
2 Press and hold the power button on the panel for three seconds to power on. Power button location may vary by panel model.
3 Locate and press the setup wizard icon to begin the setup process. Follow the instructions on the screen.*
NAVIGATING THE CONTROL PANEL
It’s as easy as scroll,
DISMISS To dismiss a pop-up, click outside of the pop-up screen.
swipe, touch, and dismiss.
NOTE: A backup battery is built into the control panel to keep your security system running during power outages. It charges auto- matically when the panel is plugged in. A fully charged battery provides 24 hours of backup protection.
SCROLL Scroll up or down to reveal additional content on a page.
SWIPE Swipe left or right to change pages.
TOUCH Touch an icon to view its contents.
4
Made with FlippingBook - Online Brochure Maker