You can place your door/window sensor on anything that opens and closes, such as entry doors, windows, drawers, or even a safe. Installing them is as simple as playing with stickers. LET’S MAKE SENSE OF IT
INSTALL
HOW TO INSTALL DOOR/WINDOW SENSORS
Magnet locator mark
Magnet Sensor
2 Remove the two battery tabs from the sensor.
1 Before installing, clean the surface with the provided alcohol pads to ensure secure mounting.
3 Notice the arrows on the sides of the magnet and the sensor. These arrows need to point toward each other. Be sure to mark the placement of each of them on the surface you’re planning to use so that the arrows will line up correctly once they’re mounted.
No more than 1/4" (7 mm) gap, or about a pencil width apart.
6 Ensure that the arrows line up. Position the magnet and sensor as close together as possible. The gap between them shouldn’t be more than 1/4" (7 mm), or about a pencil width apart. Press the sensor and the magnet to the marked surface for 30 seconds to allow the adhesive to fully adhere.
4 Apply the provided adhesive strips to the back of the sensor and the magnet.
5 Remove the
NOTE: If you need to remove the adhesive strips, rest assured that they won’t damage walls and other surfaces. Simply peel them off. If there is any sticky residue, a little Sol-U- Mel ® will help to remove it.
protective film to expose adhesive.
6
Made with FlippingBook - Online Brochure Maker