• Set of (8) sockets fits all number and SAE standard taps thru 1/2” • Also fits 1/8” NPT taps and metric taps thru 12mm • Sockets contained on vinyl holder TAP SOCKET SET
44 D
76 PC. TAP & DIE SET #4-40, #6-32, #8-32,#10-24, #10-32, #12-24 machine screw plug tap and 5/8”hex dies; 1/4”-20, 1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16-14, 7/16”-20, 1/2”-13,1/2”-20 fractional plug tap and 1”hex dies; M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1 metric plugs taps and 5/8”hex dies; M7x1, M8x1,M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75 metric plug taps and 1”hex dies; 1/8”-27 NPT and 18-/8”-28 NPT pipe thread plug taps and 1”hex dies; adjustable die stock for 1”dies; plain die stock for 5/8”dies; adjustable handle tap wrench for taps 1/4”–1/2”; 2-in-1 tap wrench for taps 1/4”–1/2”; t-handle tap wrench for taps #0–1/4”; metric thread pitch gauge; fractional thread pitch gauge; molded case
TAP & DIES
$37.89 LIS-70500
117 PC. DELUXE TAP & DIE SET The ATD-277 Tap and Die Set includes everything in the ATD- 276 Tap and Die Set; #3, #7, #9, #16, #19, #20, #21, #25, #29, #30, #36, #39, #43, letter B, letter F, letter H, letter I, letter J, letter O, letter Q, letter R, letter S, letter U, letter Z, 5/64”, 7/64”, 5/32”, 1/4”, 19/64”, 5/16”, 21/64”, 3/8”, 25/64”, 13/32”, 27/64”, 29/64”high speed drill bits; EX-1, EX-2, EX-3, EX-4, EX-5 spiral flute screw and bolt extractors; molded case ATD-277........................$226.29
• 3/8” Dr. for 6mm, 8mm, 1/4” & 5/16” studs • 1/2” Dr. for 10mm, 12mm, 3/8” & 7/16” studs 8 PC. SAE & METRIC STUD REMOVER SET
$177.19 ATD-276
$114.89 ATD-6508
• Specifically designed to remove and install studs the right way • Eliminates the potential for damage to studs • Each kit includes five installers and five removers in multiple sizes STUD REMOVAL AND INSTALLATION KITS MTI-95600 SAE SET....................$58.99 MTI-95700 METRIC SET..............$58.99 • SAE Thread Sizes: 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14 • Metric Thread Sizes: M6 x 1, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5
ATD-277
ATD-276
48 PC. SAE & METRIC THREAD RESTORER KIT
SCREW & BOLT EXTRACTOR SETS
ACE-11135ZR
(10) Metric Dies: M6-1, M8-1.25, M10-1, M10-1.25, M10-1.5, M11-1.5, M12-1.25, M12-1.5, M12-1.75, M14-1.5 (7) SAE Coarse Dies: 1/4”-20, 5/16”-18, 3/8”-16, 7/16”-14, 1/2”-13, 9/16”-12, 5/8”-11 (7) SAE Fine Dies: 1/4”-28, 5/16”-24, 3/8”-24, 7/16”-20, 1/2”-20, 9/16”-18, 5/8”-18 KAS-971...................... $99.89
ACE-11119
10 Pc. Spiral Extractor and Drill Bit Set
EX-1, EX-2, EX-3, EX-4 and EX-5 spiral flute screw extractors; 5/64”, 7/64”, 5/32”, 1/4”, 19/64”drill bits; metal index case EX-1–EX-6 spiral flute screw extrac- tors; 1/8”–1/2”multi-spline screw extractors; 5/64”–1/2” LH Cobalt drill bits; molded case 1/8”–13/32”hex head extractors; molded case 1/8”–7/8”multi-spline extractors; molded case 1/4”, 5/16” (8mm), 3/8”, 7/16” (11mm), 1/2”, 9/16” (14mm), 5/8” (16mm), 11/16”, 3/4” (19mm), 10mm, 12mm, 13mm and 17mm bolt extractors; molded case 3/8”–5/8”bolt extractors; molded case 5/16” (8mm), 10mm, 13mm, 11/16” and 3/4” (19mm) bolt extractors in a clamshell
ACE-11135
35 Pc. Screw Extractor and Drill Bit Set
ACE-53226
10 Pc. Hex Head Multi-Spline Screw and Bolt 25 Pc. Hex Head Multi-Spline Screw Extractor 13 Pc. Pro Industrial Bolt Extractor Set
• Permits highest torque applied to broken fastener without expansion - allowing higher percentage of broken fastener to be turned out 25 PC. SCREW EXTRACTOR/ DRILL AND GUIDE SET
ACE-53227
ACE-54113
VSG-394001
• Can be used on thread sizes 5mm–16mm • Removes broken fastener without breaking
AST-9447..................... $49.99
ACE-394001
5 Pc. BOLT-GRIP Bolt Extractor Base Set 5 Pc. BOLT-GRIP Extractor Expansion Set
• Loosens rusted or frozen nuts, bolts and screws • Can be reversed to tighten and can be used with impacts • Delivers over 200 ft.-lbs. of shock torque hand impact tool sets
ACE-394002
76 PC. MACHINE SCREW/SAE/MM/TAP & HEX DIE SUPER SET #4-40, #6-32, #8-32, #10-24, #10-32, #12-24; 1/4”-20, 1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16”-14, 7/16”-20, 1/2”-13, 1/2”-20; M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75; 1/8”-27 NPT, 1/8”-28 BSP; adjustable/nonadjustable t-handle tap wrench; adjustable and plain die stock; 2-in-1 tap wrench; 16 leaf metric thread gauge; 18 leaf standard thread gauge; molded case 41 PC. METRIC TAP AND HEX DIE SET M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1,M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.7; 1/8”-28 BSP; plain die stock; 5/8”hex dies; adjustable die stock for 1”dies; adjust- able handle tap wrench for #0–1/2”; t-handle wrench for taps #0–1/4”; 2-in-1 tap wrench for taps 1/4”–1/2”; 18 leaf metric thread pitch gauge; molded case ACE-26376
117 PC. MACHINE SCREW/SAE/MM/TAP & HEX DIE AND DRILL BIT DELUXE SET (6) machine screw taps and (6) dies; (10) SAE taps and (10) dies; (16) metric taps and (16) dies; (2) pipe taps and (2) dies; high speed drill bits; spiral screw extractors; adjustable handle tap wrench; 2-in-1 tap wrench; T-handle wrench; pitch gauges; molded case
• 3/8” Sq. Dr. with 3/8” Dr. bit holder; #1, #2, #3 and #4 Phillips; and 3/8” straight slot bits LIS-29200 3/8” DR. SET.....................$38.49 LIS-30200 1/2” DR. SET.....................$38.49 • 1/2” sq. drive with 1/2” drive bit holder; #1, #2, #3, #4 Phillips, and 3/8” straight slot bits
ACE-26377
EXO BURR ™ EXTERNAL DEBURRER
41 PC. MACHINE SCREW WITH SAE TAP & DIE SET
• Quickly repairs damaged threads on steel bolts including stainless steel and hardened steel, threaded rod, copper, brass, aluminum, plastics and wood • Works with most power drills on materials ranging from 5/16” to 7/8” • Made from hardened steel
#4-40, #6-32, #8-32,#10-24, #10-32, #12-24 plug tap and 5/8”hex dies; 1/4”-20, 1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16-14, 7/16”-20, 1/2”-13,1/2”-20 plug tap and 1”hex dies; 1/8”-27 NPT pipe thread plug tap and 1”hex die; adjustable die stock for 1”dies; plain die stock for 5/8” hex dies; adjustable handle tap wrench for taps #0–1/2”; t-handle wrench for taps #0–1/4”; 2-in-1 tap wrench for taps 1/4”–1/2”; 18 leaf standard thread pitch gauge; molded case
TIT-51950.................... $66.79
EXO BURR ™ EXTERNAL DEBURRER • Works with most power drills on materials ranging from 7/64” to 7/16”
ACE-26317
ACE-24606
TIT-51951.................... $54.69
Made with FlippingBook flipbook maker