ADFORS Novelio® Classic fibreglass wallcovering catalogue

SAINT-GOBAIN ADFORS Novelio® Classic fiberglass wallcovering catalogue.

Novelio® Classic Glass fibre wallcoverings

Paintable glass fibre wallcoverings This range provides maximum protection to walls and ceilings whilst being easy to install and saving time for the applicator thanks to a wide range of finishes: pre-painted, pre-glued or self-adhesive. At the same time this range give you many posibilities of highly decorative solutions for every type of interior.

ADFORS Novelio® paintable product range: – Classic Standard – Classic Pre-painted

– Classic Pre-glued – Classic CleanAir – Classic Mold-X – Renovation – Renovation Acoustic – Magnet – Decoration

Benefits

Impact resistant They are strong enough to withstand scrapes and will not be damaged by chair backs. They are hard wearing and will withstand impact from objects like luggage.

Breathable glass fibre Durable and breathable material that is not affected by either water or the sun, providing the wallcoverings with unique features. Made of non-toxic material Oeko-Tex 100 certification guarantees use of substances safe both for your health and the environment. Easy to apply As we want to save your time during the application, our wallcovering are easy to cut, manipulate and apply.

Fire resistant Euroclass B-s1,d0 on substrate A1 or A2.

Breathe-friendly Class A+ stands for the lowest emissions of volatile substances, lowest risk of inhaling toxics.

GLASS FIBRE WALLCOVERINGS

Decoration range

Classic range

t = type, p = paint

Novelio ® Classic Standard paintable wallcoverings

t: Matrix, p: Metallic paint

t: Weaving, p: Semi-gloss paint

t: Cement, p: Transparent paint

t: Expansion, p: Low gloss paint, slightly diluted with water

t: Mosaic, p: High-gloss paint

t: Iris, p: Low gloss paint

t: Zebra, p: Semi transparent paint

Renovation range

Magnet range

IMPACT RESISTANT

GLASS FIBRE

t: DecoVeil, p: Low gloss paint

t: Fine, p: Low gloss paint

FIRE RESISTANT

A standard range of woven and nonwoven paintable patterns to cover cracks and reinforce delicate surfaces. These wallcoverings are perfect for use in high traffic areas for new construction or renovation in both residential (halls stairs and landings) and also non residential (hotels, hospitals, schools, offices).

Weight

Roll size

Rolls/Pallet Quantity/Pallet

Finish

Sample

Type

g/m²

m x m

pcs

m²

* * * * * * * * * * * * * * * * * * * * *

GV45 T1000 T1003 T1005 T1006 T1009 T1010 T1011 T1012 T1017 T1023 T1024 T1510 T2002 T2005 T2006 T2007 T2009 T2011 T2012

50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1

40 24 40 24 40

2000 1200 2000 1200 2000 900 1200 1200 1500 750 900 1500 2400 900 900 900 900 1200 900 1200 1800

168 136 174 152 195 147 159 120 210 195 147

24 24 30

15 18

PAINTABLE

Instructions

CLASSIC STANDARD

The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Cut to length according to room height (+10 cm). 2. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 3. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 4. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 5. Cut off any surplus with a knife. 6. Apply a 1st layer of acrylic paint when the product is dry (~1 day). Apply a 2nd layer of acrylic paint when the product is dry (~1 day). The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.

30 48

196 184 185 190 163 193 220

18 18 18 18

24 36

T3011

155

GV45

50 × 1 m

45 g/m 2

CLASSIC STANDARD

t: Weaving, standard finish, p: Semi-gloss paint

T1000

T1003

50 × 1 m

168 g/m 2

136 g/m 2

CLASSIC STANDARD

T1005

50 × 1 m

174 g/m 2

CLASSIC STANDARD

T1006

T1010

50 × 1 m

152 g/m 2

147 g/m 2

CLASSIC STANDARD

T1009

T1011

50 × 1 m

195 g/m 2

159 g/m 2

CLASSIC STANDARD

T1012

T1023

50 × 1 m

120 g/m 2

195 g/m 2

CLASSIC STANDARD

T1017

T1024

50 × 1 m

210 g/m 2

147 g/m 2

CLASSIC STANDARD

T1510

T2005

50 × 1 m

96 g/m 2

184 g/m 2

CLASSIC STANDARD

T2002

T2006

50 × 1 m

196 g/m 2

185 g/m 2

CLASSIC STANDARD

T2007

T2011

50 × 1 m

190 g/m 2

193 g/m 2

CLASSIC STANDARD

T2009

T2012

50 × 1 m

163 g/m 2

220 g/m 2

CLASSIC STANDARD

T3011

GLASS FIBRE WALLCOVERINGS

Novelio ® Classic Pre-painted paintable wallcoverings (EasyPaint)

50 × 1 m

155 g/m 2

CLASSIC STANDARD

PRE-PAINTED

IMPACT RESISTANT

FIRE RESISTANT

Pre-painted paintable wallcoverings

Provide maximum protection to walls and ceilings whilst bringing time savings for the applicator thanks to a pre-painted finishing. At the same time, the range is highly decorative, soft and resistant. Therefore these wallcoverings are perfect for use in high traffic areas for new construction or renovation in both residential (halls stairs and landings) and also non residential (hotels, hospitals, schools, offices).

GV190C

T1050C

T3011C

Weight

Roll size

Rolls/Pallet Quantity/Pallet

Finish

Sample

Type

g/m²

m x m

pcs

m²

* *

GV75C GV130C GV190C T1006C T1009C T1010C T1013C T1050C

100 130 190 152 195 147 158 126 126 170 192 155

50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1

32 30 24 40

1600 1500 1200 2000 900 1200 1200 2700 1200 1500 900 1800

Instructions

The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Cut to length according to room height (+10 cm). 2. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 3. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 4. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 5. Cut off any surplus with a knife. 6. Apply a 1st layer of acrylic paint when the product is dry (~1 day). With dark colors we recommend to apply a second layer of paint. The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.

* * * * * * *

PAINTABLE

24 24 54 24 30

CLASSIC PRE-PAINTED

T1112C

T2001C T2004C T3011C

GV75C

50 × 1 m

100 g/m 2

CLASSIC PRE-PAINTED

t: Weaving, pre-painted finish, p: Low gloss paint

GV130C

T1006C

50 × 1 m

130 g/m 2

152 g/m 2

CLASSIC PRE-PAINTED

T1009C

50 × 1 m

195 g/m 2

CLASSIC PRE-PAINTED

T1010C

T1112C

50 × 1 m

147 g/m 2

126 g/m 2

CLASSIC PRE-PAINTED

T1013C

T2001C

50 × 1 m

158 g/m 2

170 g/m 2

CLASSIC PRE-PAINTED

T2004C

GLASS FIBRE WALLCOVERINGS

Novelio ® Classic Pre-glued paintable wallcoverings (EasyGlue)

50 × 1 m

192 g/m 2

CLASSIC PRE-PAINTED

PRE-GLUED

PRE-PAINTED

IMPACT RESISTANT

Pre-glued wallcoverings principles: • Made with an uniform film of glue on one side which is activated by water. We guarantee: • Immediate application of the wallcovering is possible after wetting • Optimal adhesive performance even for ceilings, external angles and stairwells • Possibility to move the strip and to adjust so the joints are not visible Pre-glued wallcoverings efficiency:

• 30% saving on wallcovering application time • More than 50% if the product is pre-primed • Clean and comfortable working condition

GV130CE

T1009CE

T2004CE

T3111CE

Instructions

2,3

The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Pull the wallcovering through the machine and cut one strip of wallcovering according to the room height +10 cm, do not leave product in water. 2. Place the wallcovering panel on the wall vertically immediately after pulling it through water. 3. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 4. Cut off any surplus with a knife. 5. Apply a 1st layer of acrylic paint when the product is dry (~1 day). 6. With dark colors we recommend to apply a second layer of paint. The fiberglass fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.

Weight

Roll size

Rolls/Pallet Quantity/Pallet

Finish

Sample

Type

g/m²

m x m

pcs

m²

GV130CE GV190CE T1006CE T1009CE T1013CE T2004CE

152 216 176 255 202 253 250

50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1

24 20 30

1200 1000 1500

* *

PAINTABLE

CLASSIC PRE-GLUED

15 18 15

750 900 750

T3111CE

1000

GV190CE

50 × 1 m

216 g/m 2

CLASSIC PRE-GLUED

t: Fishbone, pre-glued finish, p: Low gloss paint

T1006CE

GLASS FIBRE WALLCOVERINGS

Novelio ® Classic CleanAir paintable wallcoverings

50 × 1 m

176 g/m 2

CLASSIC PRE-GLUED

CLEAN AIR

PRE-PAINTED

T1013CE

50 × 1 m

202 g/m 2

IMPACT RESISTANT

CLASSIC PRE-GLUED

CleanAir treatment – the solution improving indoor air quality.

ADFORS Novelio® Cleanair technology

Weight

Roll size

Rolls/Pallet Quantity/Pallet

Finish

Sample

Type

g/m²

m x m

pcs

m²

GV130CF N0101F N0130F T1013CF

130 130 130 160

50 x 1 50 x 1 50 x 1 50 x 1

24 24 24 24

1200 1200 1200 1200

PAINTABLE

CLASSIC CLEANAIR

Formaldehyde is released mainly by laminated furniture, new floor coverings, some paints or glues. That is why it is highly present after a renovation or a construction. This organic component is trapped within the wallcovering and not released back into the air. The principle is active even after several coats of paint. Other glass fibre characteristics remain, such as impact and fire resistancy. It makes ADFORS Novelio® CleanAir ideal for schools, hospitals, hotels and other private or public buildings. Performance The product can immediately absorb up to 50% of formaldehydes for 10 years or more.

1. FORMALDEHYDE ABSORPTION

2. PERMANENTLY CAPTURED

3. NEVER RELEASED

ADFORS Novelio® CleanAir

ADFORS Novelio® CleanAir action

ADFORS Novelio® CleanAir function in real conditions

GV130CF

N0101F

N0130F

T1013CF

Formaldehyde concentration ( μ g/m)

Instructions

Measure of the formaldehyde concentration

New furniture

The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Cut to length according to room height (+10 cm). 2. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 3. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 4. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 5. Cut off any surplus with a knife. 6. Apply a 1st layer of acrylic paint when the product is dry (~1 day). Apply a 2nd layer of acrylic paint when the product is dry (~1 day). FOR PRE-PAINTED WALLCOVERING – not needed, however with dark colors we recommend to apply a second layer of paint. The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.

250

Standard wall covering without ventilation

200 150 100 50 0

Wallcovering application

-70%

ADFORS Novelio® CleanAir eciency Ventilation eciency

Standard wall covering in ventilated room

ADFORS Novelio® CleanAir in ventilated room or without ventilated

Day

10 µ g/m

20 µ g/m

30 µ g/m

40 µ g/m

Standard wallcovering ADFORS Novelio® CleanAir

Tests Field tests, SGR / APAVE (3) Results available on request

Tests at the nursery of Montbonnot

GLASS FIBRE WALLCOVERINGS

Novelio ® Classic Mold-X paintable wallcoverings

MOLD RESISTANT

PRE-PAINTED

t: DecoVeil, CleanAir and pre-painted finish, p: Low gloss paint

IMPACT RESISTANT

Mold-X treatment – the solution improving the sanitary environment.

Weight

Roll size

Rolls/Pallet Quantity/Pallet

Finish

Sample

Type

g/m²

m x m

pcs

m²

GV130CM N0101M N0130M T1013CM

130 130 130 160

50 x 1 50 x 1 50 x 1 50 x 1

24 24 24 24

1200 1200 1200 1200

PAINTABLE

CLASSIC MOLD-X

Mould and bacteria quickly develop under the influence of heat, humidity and some nutriments and can cause irritation, asthma and other diseases. Our Mold-X treatment knows how to protect you even after several layers of paint. It makes ADFORS Novelio® ideal for kitchens, bathrooms and wet rooms in private and public buildings.

Mold-x principle The active ingredient breaks the chain of bacteria and mould development. The active ingredient is active even after several coats of paint.

Mold-X functioning Anti-bacterial and anti-fungal eciency

How does it work?

Threshold efficiency

Mold-X treatment stops the cycle here forever

GV130CM

N0101M

N0130M

T1013CM

Instructions

The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Prior to start check that wall is clean and free of mold. 2. Cut to length according to room height (+10 cm). 3. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 4. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 5. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 6. Cut off any surplus with a knife. 7. Apply a 1st layer of acrylic paint when the product is dry (~1 day). Apply a 2nd layer of acrylic paint when the product is dry (~1 day). FOR PRE-PAINTED WALLCOVERING – not needed, however with dark colors we recommend to apply a second layer of paint. The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.

Low efficient

Anti-bacterial activity

Anti-fungal activity

ADFORS Novelio ® Mold-X + acrylic paint Acrylic paint

Mold-x performance Anti-bacterial and anti-fungal performances of painted products have been assessed by official labs. For maximum protection use in conjuction with a special anti fungal or anti bacterial paint (hospitals).

SGR, Scientitific Institute of Hygiena and Analyse, National History Museum

Certification

A+ – top class testing for VOC emissions according to the requirements of French legislation CE mark – based on the EN15102 European norm Oeko-Tex Standard 100 – contains no harmful substances certification Euroclass B-s1-d0 – fire resistance certification ASTM E84 – reaction to fire – Class A CAN ULC – Canadian standard for fire resistance IMO certification – smoke, toxicity and surface flammability certification for ADFORS Novelio® Nature range

t: DecoVeil, Mold-X and pre-painted finish, p: Low gloss vinyl paint

Saint-Gobain ADFORS – innovative, strong and sustainable ADFORS Novelio® is produced by Saint-Gobain ADFORS. We are a global leader in the development and production of reinforcement fabrics for the construction industry. Our innovative glass fibre weaving technology enables us to manufacture unique products and tailor-made solutions. We always care about the environment and your health.

SAINT-GOBAIN ADFORS CZ s.r.o. Sokolovská 106, 570 01 Litomyšl, Czech Republic

Tel.: + 420 461 651 111 Fax: + 420 461 651 350 www.adfors.com

www.adfors.com

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48

eu.adfors.com

Made with FlippingBook - Online Brochure Maker