Pre-painted paintable wallcoverings
Provide maximum protection to walls and ceilings whilst bringing time savings for the applicator thanks to a pre-painted finishing. At the same time, the range is highly decorative, soft and resistant. Therefore these wallcoverings are perfect for use in high traffic areas for new construction or renovation in both residential (halls stairs and landings) and also non residential (hotels, hospitals, schools, offices).
GV190C
T1050C
T3011C
Weight
Roll size
Rolls/Pallet Quantity/Pallet
Finish
Sample
Type
g/m²
m x m
pcs
m²
* *
GV75C GV130C GV190C T1006C T1009C T1010C T1013C T1050C
100 130 190 152 195 147 158 126 126 170 192 155
50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1
32 30 24 40
1600 1500 1200 2000 900 1200 1200 2700 1200 1500 900 1800
Instructions
1
2
3
The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Cut to length according to room height (+10 cm). 2. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 3. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 4. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 5. Cut off any surplus with a knife. 6. Apply a 1st layer of acrylic paint when the product is dry (~1 day). With dark colors we recommend to apply a second layer of paint. The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.
* * * * * * *
18
PAINTABLE
24 24 54 24 30
CLASSIC PRE-PAINTED
4
5
6
T1112C
T2001C T2004C T3011C
18
36
Made with FlippingBook - Online Brochure Maker