Pre-glued wallcoverings principles: • Made with an uniform film of glue on one side which is activated by water. We guarantee: • Immediate application of the wallcovering is possible after wetting • Optimal adhesive performance even for ceilings, external angles and stairwells • Possibility to move the strip and to adjust so the joints are not visible Pre-glued wallcoverings efficiency:
• 30% saving on wallcovering application time • More than 50% if the product is pre-primed • Clean and comfortable working condition
GV130CE
T1009CE
T2004CE
T3111CE
Instructions
1a
1b
2,3
The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Pull the wallcovering through the machine and cut one strip of wallcovering according to the room height +10 cm, do not leave product in water. 2. Place the wallcovering panel on the wall vertically immediately after pulling it through water. 3. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 4. Cut off any surplus with a knife. 5. Apply a 1st layer of acrylic paint when the product is dry (~1 day). 6. With dark colors we recommend to apply a second layer of paint. The fiberglass fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.
Weight
Roll size
Rolls/Pallet Quantity/Pallet
Finish
Sample
Type
g/m²
m x m
pcs
m²
GV130CE GV190CE T1006CE T1009CE T1013CE T2004CE
152 216 176 255 202 253 250
50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1 50 x 1
24 20 30
1200 1000 1500
* *
4
5
6
PAINTABLE
CLASSIC PRE-GLUED
15 18 15
750 900 750
*
T3111CE
20
1000
Made with FlippingBook - Online Brochure Maker