CleanAir treatment – the solution improving indoor air quality.
ADFORS Novelio® Cleanair technology
Weight
Roll size
Rolls/Pallet Quantity/Pallet
Finish
Sample
Type
g/m²
m x m
pcs
m²
GV130CF N0101F N0130F T1013CF
130 130 130 160
50 x 1 50 x 1 50 x 1 50 x 1
24 24 24 24
1200 1200 1200 1200
PAINTABLE
CLASSIC CLEANAIR
Formaldehyde is released mainly by laminated furniture, new floor coverings, some paints or glues. That is why it is highly present after a renovation or a construction. This organic component is trapped within the wallcovering and not released back into the air. The principle is active even after several coats of paint. Other glass fibre characteristics remain, such as impact and fire resistancy. It makes ADFORS Novelio® CleanAir ideal for schools, hospitals, hotels and other private or public buildings. Performance The product can immediately absorb up to 50% of formaldehydes for 10 years or more.
1. FORMALDEHYDE ABSORPTION
2. PERMANENTLY CAPTURED
3. NEVER RELEASED
ADFORS Novelio® CleanAir
ADFORS Novelio® CleanAir action
ADFORS Novelio® CleanAir function in real conditions
GV130CF
N0101F
N0130F
T1013CF
Formaldehyde concentration ( μ g/m)
Instructions
Measure of the formaldehyde concentration
New furniture
1
2
3
The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C. 1. Cut to length according to room height (+10 cm). 2. Apply the dispersion adhesive evenly on the wall using a roller (~200 g/m²). 3. Place the wallcovering panel on the wall vertically and smooth it with a plastic spatula. 4. Place the adjacent panel edge to edge (respect vertical pattern repeat). Repeat steps 1, 2, and 3 with other panels until you have finished the room. 5. Cut off any surplus with a knife. 6. Apply a 1st layer of acrylic paint when the product is dry (~1 day). Apply a 2nd layer of acrylic paint when the product is dry (~1 day). FOR PRE-PAINTED WALLCOVERING – not needed, however with dark colors we recommend to apply a second layer of paint. The glass fibre fabric is carefully checked before leaving our factory but should also be checked again just before hanging. Any claim should be accompanied with roll label and a sample featuring the defect.
250
Standard wall covering without ventilation
200 150 100 50 0
Wallcovering application
-70%
ADFORS Novelio® CleanAir eciency Ventilation eciency
Standard wall covering in ventilated room
ADFORS Novelio® CleanAir in ventilated room or without ventilated
0
5
10
15
Day
4
5
6
0
10 µ g/m
20 µ g/m
30 µ g/m
40 µ g/m
Standard wallcovering ADFORS Novelio® CleanAir
Tests Field tests, SGR / APAVE (3) Results available on request
Tests at the nursery of Montbonnot
Made with FlippingBook - Online Brochure Maker